[LehaMechanic]

А если вместо

Код:

linux

ввести

Код:

oszone

[COM-BAT]

oszone: команда не найдена

[zai]

Собственно стало страшно интересно что ж это за существо такое? »

это что-то вроде виртуальной машины, т.е. linux внутри linux

[morozoff]

user-mode-linux »

Читаем: User-mode Linux

[yurfed]

sudo apt-get install user-mode-linux »

Это вам ни о чём не говорит?
Выполните эту строку. Если любые зависимости у вас имеются - это хорошо, если нет, включайте интернет.

Собственно не понятно что вы хотели увидеть после этой многозначительной фразы
Пример

читать дальше »

~$ linux
Locating the bottom of the address space ... 0x10000
Locating the top of the address space ... 0xc0000000
Core dump limits :
soft - 0
hard - NONE
Checking that ptrace can change system call numbers...OK
Checking syscall emulation patch for ptrace...OK
Checking advanced syscall emulation patch for ptrace...OK
Checking for tmpfs mount on /dev/shm...nothing mounted on /dev/shm
Checking PROT_EXEC mmap in /tmp/...OK
Checking for the skas3 patch in the host:
- /proc/mm...not found: No such file or directory
- PTRACE_FAULTINFO...not found
- PTRACE_LDT...not found
UML running in SKAS0 mode
Adding 27926528 bytes to physical memory to account for exec-shield gap
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.5.0-rc3 (root@akateko) (gcc version 4.7.0 (Ubuntu/Linaro 4.7.0-13ubuntu1) ) #2 Thu Jun 21 02:43:03 UTC 2012 ()
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 14892
Kernel command line: root=98:0
PID hash table entries: 256 (order: -2, 1024 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
allocated 120080 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Memory: 25932k available
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:15
Calibrating delay loop... 2308.50 BogoMIPS (lpj=11542528)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Checking for host processor cmov support...Yes
Checking that host ptys support output SIGIO...Yes
Checking that host ptys support SIGIO on close...No, enabling workaround
Using 2.6 host AIO
NET: Registered protocol family 16
bio: create slab <bio-0> at 0
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switching to clocksource itimer
AppArmor: AppArmor Filesystem Enabled
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP: reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
mconsole (version 2) initialized on /home/yura/.uml/gTCOj1/mconsole
Checking host MADV_REMOVE support...OK
Mapper v0.1
mmapper_init - find_iomem failed
UML Watchdog Timer
Host TLS support detected
Detected host type: i386 (GDT indexes 6 to 9)
audit: initializing netlink socket (disabled)
type=2000 audit(1367125907.613:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
JFS: nTxBlock = 202, nTxLock = 1620
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
Btrfs loaded
msgmni has been set to 50
io scheduler noop registered
io scheduler deadline registered (default)
watchdog: Software Watchdog: cannot register miscdev on minor=130 (err=-16).
watchdog: Software Watchdog: a legacy watchdog module is probably present.
softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=1)
TCP: cubic registered
NET: Registered protocol family 17
Initialized stdio console driver
Console initialized on /dev/tty0
console [tty0] enabled
Initializing software serial port version 1
console [mc-1] enabled
Failed to initialize ubd device 0 :Couldn't determine size of device's file
registered taskstats version 1
VFS: Cannot open root device "98:0" or unknown-block(98,0): error -6
Please append a correct "root=" boot option; here are the available partitions:
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(98,0)
0b46fef4: [<083da876>] panic+0x7c/0x16b
0b46ff18: [<08049b7e>] mount_block_root+0x21f/0x22f
0b46ff50: [<0811dc9e>] sys_mknod+0x28/0x2c
0b46ff64: [<08049bee>] mount_root+0x60/0x65
0b46ff78: [<08049d38>] prepare_namespace+0x145/0x181
0b46ff90: [<08049875>] kernel_init+0x1d0/0x1d5
0b46ffac: [<080490a3>] repair_env_string+0x0/0x8f
0b46ffc0: [<0808faf0>] run_kernel_thread+0x42/0x4a
0b46ffe0: [<0808facd>] run_kernel_thread+0x1f/0x4a
0b46ffe8: [<080631b4>] new_thread_handler+0x87/0xb9
0b46ffec: [<080496a5>] kernel_init+0x0/0x1d5


EIP: 0073:[<b7705424>] CPU: 0 Not tainted ESP: 007b:bfce0b44 EFLAGS: 00000282
Not tainted
EAX: 00000000 EBX: 00000985 ECX: 00000013 EDX: 00000985
ESI: 00000981 EDI: bfce0b90 EBP: bfce0cf4 DS: 007b ES: 007b
0b46feb4: [<080b47bb>] notifier_call_chain+0x2d/0x53
0b46fedc: [<080b482e>] atomic_notifier_call_chain+0x2f/0x33
0b46fef4: [<083da89e>] panic+0xa4/0x16b
0b46ff18: [<08049b7e>] mount_block_root+0x21f/0x22f
0b46ff50: [<0811dc9e>] sys_mknod+0x28/0x2c
0b46ff64: [<08049bee>] mount_root+0x60/0x65
0b46ff78: [<08049d38>] prepare_namespace+0x145/0x181
0b46ff90: [<08049875>] kernel_init+0x1d0/0x1d5
0b46ffac: [<080490a3>] repair_env_string+0x0/0x8f
0b46ffc0: [<0808faf0>] run_kernel_thread+0x42/0x4a
0b46ffe0: [<0808facd>] run_kernel_thread+0x1f/0x4a
0b46ffe8: [<080631b4>] new_thread_handler+0x87/0xb9
0b46ffec: [<080496a5>] kernel_init+0x0/0x1d5

[COM-BAT]

Это вам ни о чём не говорит? »

Я знаю что это означает но по вызове программы немогу определить для чего она всё таки создана.
morozoff, Огромное спасибо

[morozoff]

COM-BAT, Всегда пожалуйста