FreeBSD - [решено] не собирается glib

FreeBSD - [решено] не собирается glib

Старожил

Сообщения: 398
Благодарности: 49

Всем привет.
Имеем FreeBSD 6.2-RELEASE-p9

После обновления портов как обычно не посмотрел в /usr/ports/UPDATING и выполнил portupgrade -a... portupgrade ругнулся на невозможность автоматического обновления glib. Не задумываясь о том что творю glib снес а вот поставить назад... с этим возникли проблемы...

Код:

# cd /usr/ports/devel/glib20
# make
===>   glib-2.14.4 depends on executable: gmake - found
===>   glib-2.14.4 depends on file: /usr/local/bin/perl5.8.8 - found
===>   glib-2.14.4 depends on file: /usr/local/bin/libtool - found
===>   glib-2.14.4 depends on executable: pkg-config - found
===>   glib-2.14.4 depends on shared library: pcre.0 - found
===>   glib-2.14.4 depends on shared library: intl - found
===>  Configuring for glib-2.14.4
env: ./configure: Permission denied
===>  Script "configure" failed unexpectedly.
Please run the gnomelogalyzer, available from
"http://www.freebsd.org/gnome/gnomelogalyzer.sh", which will diagnose the
problem and suggest a solution. If - and only if - the gnomelogalyzer cannot
solve the problem, report the build failure to the FreeBSD GNOME team at
gnome@FreeBSD.org, and attach (a)
"/tmp/port_wrk/usr/ports/devel/glib20/work/glib-2.14.4/config.log", (b) the
output of the failed make command, and (c) the gnomelogalyzer output. Also,
it might be a good idea to provide an overview of all packages installed on
your system (i.e. an `ls /var/db/pkg`). Put your attachment up on any website,
copy-and-paste into http://freebsd-gnome.pastebin.com, or use send-pr(1) with
the attachment. Try to avoid sending any attachments to the mailing list
(gnome@FreeBSD.org), because attachments sent to FreeBSD mailing lists are
usually discarded by the mailing list software.
*** Error code 1

Stop in /usr/ports/devel/glib20.
*** Error code 1

Stop in /usr/ports/devel/glib20.

скачал предложенный файл http://www.freebsd.org/gnome/gnomelogalyzer.sh и запустил:

Код:

# /yuri/./gnomelogalyzer.sh

Generating build log. Please wait... done.

The cause of your build failure is not known to gnomelogalyzer.sh.  Before
e-mailing the build log to the FreeBSD GNOME team at freebsd-gnome@FreeBSD.org,
TRY EACH OF THE FOLLOWING:

  * If you are generating your own logfile, make sure to generate it with
    something similar to:
          "make 2>&1 | tee /path/to/logfile" (sh/bash/ksh/zsh) or
          "make |& tee /path/to/logfile" (csh/tcsh)
        * Make sure your cvsup(1) configuration file specifies the 'ports-all'
          collection
        * Run cvsup(1) and attempt the build again
        * Check /usr/ports/UPDATING for information pertinent to your build
          failure
        * 99% of the commonly reported build failures can be solved by
          running "portupgrade -a"
        * Read the FAQs at http://www.FreeBSD.org/gnome/
        * Search the archives of freebsd-gnome@FreeBSD.org.  Archives can be
          searched at http://www.freebsd.org/gnome/index.html#search

If you have not performed each of the above suggestions, don't bother asking
for help.  The chances are good that you'll simply be told to perform one of
the aforementioned steps.

Если кто нибудь знает как мне теперь поставить glib назад, помогите пожалуйста.

-------
"Будьте реалистами - требуйте невозможного!" (c) Ernesto Che Guevara

Отправлено: 12:05, 26-12-2007