[Petya V4sechkin]

Что делать? Безымянный.jpg

Для завершения мониторинга нажать кнопку Stop. После зайти на все вкладки (Stats, Processes и Drivers) и посмотреть результаты. На вкладке Stats скопировать отчет целиком (в текстовом виде). На вкладке Processes задать сортировку по столбцу Pagefaults. На вкладке Drivers - по столбцам ISR и DPC.

вылетает pppoe подключение

Приведите ошибки из журнала событий -> Журналы Windows -> в разделах Система и Приложение (правой кнопкой мыши -> Копировать -> Копировать сведения как текст).

[id191248365@vk]

Отчет из latencyMon

ONCLUSION ____________________________________________________________________________________________________ _____ Your system appears to be having trouble handling real-time audio and other tasks. You are likely to experience buffer underruns appearing as drop outs, clicks or pops. One problem may be related to power management, disable CPU throttling settings in Control Panel and BIOS setup. Check for BIOS updates. LatencyMon has been analyzing your system for 0:01:27 (h:mm:ss) on all processors. ____________________________________________________________________________________________________ _____ SYSTEM INFORMATION ____________________________________________________________________________________________________ _____ Computer name: GONDAR-ПК OS version: Windows 7 Service Pack 1, 6.1, build: 7601 (x64) Hardware: G41MT-S2, Gigabyte Technology Co., Ltd. CPU: GenuineIntel Pentium(R) Dual-Core CPU E6600 @ 3.06GHz Logical processors: 2 Processor groups: 1 RAM: 4094 MB total ____________________________________________________________________________________________________ _____ CPU SPEED ____________________________________________________________________________________________________ _____ Reported CPU speed: 3066,0 MHz Measured CPU speed: 2501,0 MHz (approx.) Note: reported execution times may be calculated based on a fixed reported CPU speed. Disable variable speed settings like Intel Speed Step and AMD Cool N Quiet in the BIOS setup for more accurate results. ____________________________________________________________________________________________________ _____ MEASURED INTERRUPT TO USER PROCESS LATENCIES ____________________________________________________________________________________________________ _____ The interrupt to process latency reflects the measured interval that a usermode process needed to respond to a hardware request from the moment the interrupt service routine started execution. This includes the scheduling and execution of a DPC routine, the signaling of an event and the waking up of a usermode thread from an idle wait state in response to that event. Highest measured interrupt to process latency (µs): 14346,947914 Average measured interrupt to process latency (µs): 3,675346 Highest measured interrupt to DPC latency (µs): 220,378095 Average measured interrupt to DPC latency (µs): 0,920126 ____________________________________________________________________________________________________ _____ MEASURED SMI, IPI AND CPU STALLS ____________________________________________________________________________________________________ _____ The SMI, IPI and CPU stalls value represents the highest measured interval that a CPU did not respond while having its maskable interrupts disabled. Highest measured SMI or CPU stall (µs) 7,012030 ____________________________________________________________________________________________________ _____ REPORTED ISRs ____________________________________________________________________________________________________ _____ Interrupt service routines are routines installed by the OS and device drivers that execute in response to a hardware interrupt signal. Highest ISR routine execution time (µs): 110,709067 Driver with highest ISR routine execution time: dxgkrnl.sys - DirectX Graphics Kernel, Microsoft Corporation Highest reported total ISR routine time (%): 0,178072 Driver with highest ISR total time: dxgkrnl.sys - DirectX Graphics Kernel, Microsoft Corporation Total time spent in ISRs (%) 0,322228 ISR count (execution time <250 µs): 146971 ISR count (execution time 250-500 µs): 0 ISR count (execution time 500-999 µs): 0 ISR count (execution time 1000-1999 µs): 0 ISR count (execution time 2000-3999 µs): 0 ISR count (execution time >=4000 µs): 0 ____________________________________________________________________________________________________ _____ REPORTED DPCs ____________________________________________________________________________________________________ _____ DPC routines are part of the interrupt servicing dispatch mechanism and disable the possibility for a process to utilize the CPU while it is interrupted until the DPC has finished execution. Highest DPC routine execution time (µs): 147,725701 Driver with highest DPC routine execution time: nvlddmkm.sys - NVIDIA Windows Kernel Mode Driver, Version 320.00 , NVIDIA Corporation Highest reported total DPC routine time (%): 0,290932 Driver with highest DPC total execution time: USBPORT.SYS - Драйвер порта USB 1.1 и 2.0, Microsoft Corporation Total time spent in DPCs (%) 0,980602 DPC count (execution time <250 µs): 447578 DPC count (execution time 250-500 µs): 0 DPC count (execution time 500-999 µs): 0 DPC count (execution time 1000-1999 µs): 0 DPC count (execution time 2000-3999 µs): 0 DPC count (execution time >=4000 µs): 0 ____________________________________________________________________________________________________ _____ REPORTED HARD PAGEFAULTS ____________________________________________________________________________________________________ _____ Hard pagefaults are events that get triggered by making use of virtual memory that is not resident in RAM but backed by a memory mapped file on disk. The process of resolving the hard pagefault requires reading in the memory from disk while the process is interrupted and blocked from execution. NOTE: some processes were hit by hard pagefaults. If these were programs producing audio, they are likely to interrupt the audio stream resulting in dropouts, clicks and pops. Check the Processes tab to see which programs were hit. Process with highest pagefault count: firefox.exe Total number of hard pagefaults 16 Hard pagefault count of hardest hit process: 15 Highest hard pagefault resolution time (µs): 22962,740705 Total time spent in hard pagefaults (%): 0,013278 Number of processes hit: 2 ____________________________________________________________________________________________________ _____ PER CPU DATA ____________________________________________________________________________________________________ _____ CPU 0 Interrupt cycle time (s): 1,754581 CPU 0 ISR highest execution time (µs): 110,709067 CPU 0 ISR total execution time (s): 0,311458 CPU 0 ISR count: 116898 CPU 0 DPC highest execution time (µs): 147,725701 CPU 0 DPC total execution time (s): 1,097973 CPU 0 DPC count: 413850 ____________________________________________________________________________________________________ _____ CPU 1 Interrupt cycle time (s): 1,224394 CPU 1 ISR highest execution time (µs): 69,495108 CPU 1 ISR total execution time (s): 0,249837 CPU 1 ISR count: 30073 CPU 1 DPC highest execution time (µs): 146,326810 CPU 1 DPC total execution time (s): 0,610158 CPU 1 DPC count: 33728 ____________________________________________________________________________________________________ _____

http://saveimg.ru/show-image.php?id=...5fecd6046db36c
http://saveimg.ru/show-image.php?id=...02dc0c66dbc6a5

Насчет журнала, замечена лишь 1- на ошибка
"//./root/CIMV2 SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 99 0x80041003"

так- же замечен новый лаг, курсор после лага меняется на произвольный!

[Petya V4sechkin]

id191248365@vk, попробуйте отключить все USB-устройства.

курсор после лага меняется на произвольный

После лага запустите RAMMap и покажите скриншот вкладки Use Counts.

[id191248365@vk]

После отключение мыши произошел глобальный фриз, нажал RESET!
Пока лагов не наблюдается.
Проблема могла заключаться в лаге драйвера на мышь?

[id191248365@vk]

С утра тоже самое
http://s018.radikal.ru/i509/1305/53/80e91e8ef2f6.jpg

[Petya V4sechkin]

id191248365@vk, отключение USB-устройств не помогло?
Есть подозрение, что неисправен USB-порт (или контакты коротит) или USB-контроллер на материнской плате.

Хотя непонятно, как это связано с:

вылетает pppoe подключение

[id191248365@vk]

Насчет pppoe я поменял на прямое соединение через роутер, во время лага не видно нечего таково. Насчет лага: Бьюсь до сих- пор. Помогает отключение и новое подключение мыши. Но только до первого ребута.

Нашел какое- то странное запоминающее устройство. Хотя к портам подключены только мыш и клавиатура. При отключении не пропадает. Где копать?

[аьихан]

Ну вот, мышь с клавиатурой прежде всего и копать. Попробовать другую мышь, проверить эту мышь на другом компе, если проблема не исчезнет, попробовать отключить USB в bios.

[id191248365@vk]

Мышь, клава в норме. нашел в чем была проблема. В usb порт попала скрепка(видно мышку носил в кармане и нечаянно в порт залетела), Она замыкала перемычки и это вызывало фриз системы.