Новый участник
Сообщения: 2
Благодарности: 0
|
Профиль
|
Отправить PM
| Цитировать
Angry Demon, пробовал восстановить через serial. После выполнения всех действий роутер мигает светодиодами (SYS с меньшей частотой, WLAN с большей). Лог процесса восстановления прилагаю.
Лог
U-Boot 1.1.4 (Apr 28 2013 - 16:01:02)
AP83 (ar9100) U-boot 0.0.11
DRAM:
sri
32 MB
id read 0x100000ff
flash size 8MB, sector count = 128
Flash: 8 MB
Using default environment
In: serial
Out: serial
Err: serial
Net: ag7100_enet_initialize...
No valid address in Flash. Using fixed address
: cfg1 0xf cfg2 0x7114
eth0: 00:03:7f:09:0b:ad
eth0 up
eth0
Autobooting in 1 secondsar7100> tftp 0x81000000 off.bin
dup 1 speed 1000
Using eth0 device
TFTP from server 192.168.0.5; our IP address is 192.168.0.2
Filename 'off.bin'.
Load address: 0x81000000
Loading: *#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
############################
done
Bytes transferred = 8126464 (7c0000 hex)
ar7100> erase 0xbf020000 +7c0000
First 0x2 last 0x7d sector size 0x10000
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125
Erased 124 sectors
ar7100> cp.b 0x81000000 0xbf020000 0x7c0000
Copy to Flash... write addr: bf020000
done
ar7100> bootm 0xbf020000
## Booting image at 000bf200 ...
Uncompressing Kernel Image ... Error: Bad gzipped data
GUNZIP ERROR - must RESET board to recover
Resetting...
U-Boot 1.1.4 (Apr 28 2013 - 16:01:02)
AP83 (ar9100) U-boot 0.0.11
DRAM:
sri
32 MB
id read 0x100000ff
flash size 8MB, sector count = 128
Flash: 8 MB
Using default environment
In: serial
Out: serial
Err: serial
Net: ag7100_enet_initialize...
No valid address in Flash. Using fixed address
: cfg1 0xf cfg2 0x7114
eth0: 00:03:7f:09:0b:ad
eth0 up
eth0
Autobooting in 1 seconds## Booting image at bf020000 ...
Uncompressing Kernel Image ... OK
Starting kernel ...
Linux version 2.6.15--LSDK-6.1.1.40 (zhongjin@rd3linux.tplink) (gcc version 3.4.4) #1 Tue Jul 12 09:09:26 CST 2011
flash_size passed from bootloader = 8
CPU revision is: 00019374
Determined physical RAM map:
memory: 02000000 @ 00000000 (usable)
User-defined physical RAM map:
memory: 02000000 @ 00000000 (usable)
Built 1 zonelists
Kernel command line: console=ttyS0,115200 root=/dev/mtdblock2 rootfstype=squashfs init=/sbin/init mtdparts=ar7100-nor0:128k(u-boot),1024k(kernel),2816k(rootfs),64k(config),64k(art) mem=32M
Primary instruction cache 64kB, physically tagged, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, linesize 32 bytes.
Synthesized TLB refill handler (20 instructions).
Synthesized TLB load handler fastpath (32 instructions).
Synthesized TLB store handler fastpath (32 instructions).
Synthesized TLB modify handler fastpath (31 instructions).
Cache parity protection disabled
PID hash table entries: 256 (order: 8, 4096 bytes)
Using 200.000 MHz high precision timer.
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 30516k/32768k available (1407k kernel code, 2236k reserved, 300k data, 112k init, 0k highmem)
Mount-cache hash table entries: 512
Checking for 'wait' instruction... available.
NET: Registered protocol family 16
Jumpstart button pressed.
SCSI subsystem initialized
AR7100 GPIOC major 0
squashfs: version 3.3 (2007/10/31) Phillip Lougher
squashfs: LZMA suppport for slax.org by jro
Initializing Cryptographic API
io scheduler noop registered
io scheduler deadline registered
Serial: 8250/16550 driver $Revision: #2 $ 1 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x0 (irq = 19) is a 16550A
RAMDISK driver initialized: 1 RAM disks of 8192K size 1024 blocksize
PPP generic driver version 2.4.2
PPPoX init, max protocols:3
NET: Registered protocol family 24
pppox protocol 0 register. max:3
cmdlinepart partition parsing not available
Searching for RedBoot partition table
5 RedBoot partitions found on MTD device ar7100-nor0
Creating 5 MTD partitions on "ar7100-nor0":
0x00000000-0x00020000 : "boot"
0x00020000-0x00120000 : "kernel"
0x00120000-0x007e0000 : "rootfs"
0x007e0000-0x007f0000 : "config"
0x007f0000-0x00800000 : "art"
->Oops: flash id 0x10216 .
NET: Registered protocol family 2
IP route cache hash table entries: 512 (order: -1, 2048 bytes)
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
ar7100wdt_init: Registering WDT success
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 112k freed
init started: BusyBox v1.01 (2011.07.12-01:12+0000) multi-call binary
Algorithmics/MIPS FPU Emulator v1.5
This board use 2.6.15
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.4 (256 buckets, 5120 max) - 244 bytes per conntrack
ip_conntrack_pptp version 3.1 loaded
insmod: cannot open module `/lib/modules/2.6.15/kernel/flashid.ko': No such file or directory
pppox protocol 1 register. max:3
PPPoL2TP kernel driver, V0.17. fixed many bug. drop rcv pkts and xmit pkts while no buffer, use pass time HZ/4.only drop ip pkt. no printk. xl2tpd 15 retries xmit. 08.20
PPTP driver version 0.8.3
pppox protocol 2 register. max:3
insmod: cannot open module `/lib/modules/2.6.15/kernel/harmony.ko': No such file or directory
insmod: cannot open module `/lib/modules/2.6.15/kernel/cdc-acm.ko': No such file or directory
Now flash open!
(none) mips #1 Tue Jul 12 09:09:26 CST 2011 (none)
(none) login: Now flash open!
Now flash open!
Now flash open!
Now flash open!
Erase from 0X7E0000 to 0X7ECBD8:.
Program from 0X7E0000 to 0X7ECBD8:
write successfully
Now flash open!
Erase from 0X7E0000 to 0X7ECBD8:.
Program from 0X7E0000 to 0X7ECBD8:
write successfully
Realtek switch id is: 0x0
AG7100: Length per segment 1536
AG7100: Max segments per packet 1
AG7100: Max tx descriptor count 40
AG7100: Max rx descriptor count 252
AG7100: fifo cfg 3 00780008
chip ID is 0x00005937
rtl8368s_getAsicPHYRegs(0, 1, 22, &data) return is 0, data is 0x00001000
++ PVID: 0x00000001, bitmap: 0x00000021
++ PVID: 0x00000003, bitmap: 0x0000003e
++ PVID: 0x00000005, bitmap: 0x0000003e
++ PVID: 0x00000007, bitmap: 0x0000003e
++ PVID: 0x00000009, bitmap: 0x0000003e
vtable vid: 0x00000002, bitmap 0x00000022
vtable vid: 0x00000004, bitmap 0x00000024
vtable vid: 0x00000006, bitmap 0x00000026
vtable vid: 0x00000008, bitmap 0x00000028
vtable vid: 0x0000000a, bitmap 0x0000002a
vtable vid: 0x0000000c, bitmap 0x0000002c
vtable vid: 0x0000000e, bitmap 0x0000002e
vtable vid: 0x00000010, bitmap 0x00000030
vtable vid: 0x00000012, bitmap 0x00000032
vtable vid: 0x00000014, bitmap 0x00000034
vtable vid: 0x00000016, bitmap 0x00000036
vtable vid: 0x00000018, bitmap 0x00000038
vtable vid: 0x0000001a, bitmap 0x0000003a
vtable vid: 0x0000001c, bitmap 0x0000003c
vtable vid: 0x0000001e, bitmap 0x0000003e
Writing 4
SIOCETHTOOL
bridge: can't decode speed from eth0: 0
device eth0 entered promiscuous mode
Now flash open!
Writing 4
br0: port 1(eth0) entering learning state
br0: topology change detected, propagating
br0: port 1(eth0) entering forwarding state
tp_domain: module license 'BSD' taints kernel.
ip_nat_pptp version 3.0 loaded
ip_conntrack_rtsp v0.01 loading
ip_nat_rtsp v0.01 loading
Ooops, static route igmp error!
ath_hal: 0.9.17.1 (AR5416, DEBUG, REGOPS_FUNC, WRITE_EEPROM, 11D)
wlan: 0.8.4.2 (Atheros/multi-bss)
ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Rights Reserved
ath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc, All Rights Reserved
ath_ahb: 0.9.4.5 (Atheros/multi-bss)
Howl Revision ID 0xb9 <6>wifi0: Atheros AR9100 WiSoC: mem=0xb80c0000, irq=2
wlan_me: Version 0.1
Copyright (c) 2008 Atheros Communications, Inc. All Rights Reserved
wlan: mac acl policy registered
TP_Flags:6****
Ooops, static route igmp error!
The selected channel is 1
Country ie is US
Country ie is US
maxrate = 300000
Country ie is US
br0: port 1(eth0) entering disabled state
Writing 4
br0: port 1(eth0) entering learning state
br0: topology change detected, propagating
br0: port 1(eth0) entering forwarding state
device ath0 entered promiscuous mode
br0: port 2(ath0) entering learning state
br0: topology change detected, propagating
br0: port 2(ath0) entering forwarding state
br0: port 2(ath0) entering disabled state
Country ie is US
br0: port 2(ath0) entering learning state
br0: topology change detected, propagating
br0: port 2(ath0) entering forwarding state
br0: port 2(ath0) entering disabled state
TP_Flags:6****
TP_Flags:0****
Country ie is US
br0: port 2(ath0) entering learning state
br0: topology change detected, propagating
br0: port 2(ath0) entering forwarding state
fuse init (API version 7.8)
fuse distribution version: 2.7.4
usbcore: registered new driver usbfs
usbcore: registered new driver hub
Port Status c000004
ar7100-ehci ar7100-ehci.0: ATH EHCI
ar7100-ehci ar7100-ehci.0: new USB bus registered, assigned bus number 1
ar7100-ehci ar7100-ehci.0: irq 3, io mem 0x1b000000
hcc_params addr 0xbb000108 val 0x6 hcs_params addr 0xbb000104 val 0x10011
ar7100-ehci ar7100-ehci.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
SIOCENABLEFWD
Inteference detected
rx_clear=100, rx_frame=0, tx_frame=0
ath_bstuck_tasklet... Calling ath_internal reset
|
Полезное сообщение чуть ниже.
