Проблема с дозвоном.

Проблема с дозвоном.

Новый участник

Сообщения: 11
Благодарности: 0

Пытаюсь позвонить wvdial'ом. Получаю вот это:
localhost root # wvdial
--> WvDial: Internet dialer version 1.53
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATDP1055555
--> Waiting for carrier.
ATDP1055555
CONNECT 41333 V44
C
Welcome to MTU-Online phones:
995-5555(K56flex,V.90),995-5556(x2,V.90)
Login as "guest" with password "mtu" for beginning
and go to http://dialup.mtu.ru for registration
Use proxy.mtu.ru with port 3128, DNS 195.34.32.11(10)
APAS20 line 6/79
User Access Verification
login:
--> Carrier detected. *Waiting for prompt.
login:
--> Looks like a login prompt.
--> Sending: guest
guest
Password:
--> Looks like a password prompt.
--> Sending: (password)
Entering PPP mode.
Async interface address is unnumbered (Loopback0)
Your IP address is 192.168.10.178. MTU is 1500 bytes
--> Looks like a welcome message.
--> Starting pppd at Fri Jun 11 18:53:43 2004
--> pid of pppd: 5949
--> Disconnecting at Fri Jun 11 18:53:44 2004
--> The PPP daemon has died: Fatal pppd error (exit code = 1)
--> man pppd explains pppd error codes in more detail.
--> Try again and look into /var/log/messages and the wvdial and pppd man pages
for more information.
--> Auto Reconnect will be attempted in 5 seconds
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
Caught signal #2! *Attempting to exit gracefully...
--> Disconnecting at Fri Jun 11 18:53:47 2004

Вот мой wvdial.conf:
[Dialer Defaults]
Modem = /dev/ttySLT0
Baud = 115200
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Dial Command = ATDP
ISDN = 0
Modem Type = Analog Modem
Phone = 1055555
Username = guest
Password = mtu
Что мне делать?

-------
Добрый день, симпатичнейший Степан Богданович!

Отправлено: 17:41, 11-06-2004