[mds]

Поставил ALT Linux Junior 2.2 (ядро 2.4.20 - alt6 - up i686), думал может в нём мой модем будет работать, а он (модем) определяется, но не работает. При попытке подключится пишет модем занят.
Где можно скачать дрова под мой модем для этого Линуха?
Может дрова для Mondrake 9.0, 9.1 подойдут?

Добавлено:

По результатам команд dmesg и lspci было выдано множество непонятной мне информации. В каких именно строках было написано про мой модем я так и не понял, поэтому(заранее извеняюсь)  вставляю опять всё
dmesg -

Linux version 2.4.20-alt6-up (rider@skif.office.altlinux.ru) (gcc version 2.96 20000731 (ALT Linux, build 2.96-alt3)) #1 Tue Mar 4 16:23:10 MSK 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000007feb000 (usable)
BIOS-e820: 0000000007feb000 - 0000000007fef000 (ACPI data)
BIOS-e820: 0000000007fef000 - 0000000007fff000 (reserved)
BIOS-e820: 0000000007fff000 - 0000000008000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
127MB LOWMEM available.
On node 0 totalpages: 32747
zone(0): 4096 pages.
zone(1): 28651 pages.
zone(2): 0 pages.
DMI 2.3 present.
44 structures occupying 1273 bytes.
DMI table at 0x000F2B40.
BIOS Vendor: Award Software, Inc.
BIOS Version: ASUS TUSL2-C ACPI BIOS Revision 1011
BIOS Release: 01/04/2002
System Vendor: System Manufacturer
Product Name: System Name
Version: System Version
Serial Number: SYS-1234567890
Board Vendor: ASUSTeK Computer INC.
Board Name: TUSL2-C
Board Version: REV 1.xx
Kernel command line: auto BOOT_IMAGE=linux-up ro root=1601
Initializing CPU#0
Detected 1320.017 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 2634.54 BogoMIPS
Memory: 127220k/130988k available (955k kernel code, 3380k reserved, 398k data, 116k init, 0k highmem)
Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0383f9ff 00000000 00000000 00000000
CPU:             Common caps: 0383f9ff 00000000 00000000 00000000
CPU: Intel(R) Celeron(TM) CPU                1100MHz stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xf0e30, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
Transparent bridge - Intel Corp. 82801BA/CA/DB PCI Bridge
PCI: Using IRQ router PIIX [8086/2440] at 00:1f.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
kinoded started
VFS: Disk quotas vdquot_6.5.1
vesafb: framebuffer at 0xf0000000, mapped to 0xc8800000, size 32768k
vesafb: mode is 1024x768x16, linelength=2048, pages=0
vesafb: protected mode interface info at c000:c6b0
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Looking for splash picture.... found (1024x768, 144927 bytes).
Console: switching to colour frame buffer device 106x34
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH2: IDE controller on PCI bus 00 dev f9
ICH2: chipset revision 17
ICH2: not 100% native mode: will probe irqs later
   ide0: BM-DMA at 0xa800-0xa807, BIOS settings: hda:DMA, hdb:pio
   ide1: BM-DMA at 0xa808-0xa80f, BIOS settings: hdc:DMA, hdd:DMA
hda: ST340016A, ATA DISK drive
hdc: Maxtor 6Y080L0, ATA DISK drive
hdd: CR-48XATE, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
blk: queue c02a80e4, I/O limit 4095Mb (mask 0xffffffff)
hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63, UDMA(100)
blk: queue c02a8428, I/O limit 4095Mb (mask 0xffffffff)
hdc: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=158816/16/63, UDMA(100)
Partition check:
hda: hda1 hda2 < hda5 >
hdc: [PTBL] [9964/255/63] hdc1 hdc2 < hdc5 hdc6 >
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind 16384)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 200k freed
VFS: Mounted root (romfs filesystem) readonly.
VFS: Mounted root (ext2 filesystem) readonly.
Trying to move old root to /initrd ... failed
Unmounting old root
Trying to free ramdisk memory ... okay
Freeing unused kernel memory: 116k freed
Executing init=/sbin/init
Real Time Clock Driver v1.10e
Adding Swap: 313228k swap-space (priority -1)
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
 Vendor: MITSUMI   Model: CR-48XATE         Rev: 1.0B
 Type:   CD-ROM                             ANSI SCSI revision: 02
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 94M
agpgart: agpgart: Detected an Intel i815, but could not find the secondary device. Assuming a non-integrated video card.
agpgart: Detected Intel i815 chipset
agpgart: AGP aperture is 64M @ 0xf8000000
MSDOS FS: IO charset cp1251
MSDOS FS: Using codepage 866
MSDOS FS: IO charset cp1251
MSDOS FS: Using codepage 866
MSDOS FS: IO charset cp1251
MSDOS FS: Using codepage 866
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 16:49:28 Mar  4 2003
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 5 for device 00:1f.2
PCI: Setting latency timer of device 00:1f.2 to 64
usb-uhci.c: USB UHCI at I/O 0xa400, IRQ 5
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 9 for device 00:1f.4
PCI: Sharing IRQ 9 with 02:0b.0
PCI: Setting latency timer of device 00:1f.4 to 64
usb-uhci.c: USB UHCI at I/O 0xa000, IRQ 9
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
inserting floppy driver for 2.4.20-alt6-up
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
PCI: Found IRQ 9 for device 02:0d.0
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
lp0: using parport0 (polling).
0: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel Module  1.0-4191  Mon Dec  9 11:49:01 PST 2002
Looking for splash picture.... found (1024x768, 17849 bytes).
Splash status on console 0 changed to on
Looking for splash picture.... found (1024x768, 17849 bytes).
Splash status on console 1 changed to on
Looking for splash picture.... found (1024x768, 17849 bytes).
Splash status on console 2 changed to on
Looking for splash picture.... found (1024x768, 17849 bytes).
Splash status on console 3 changed to on
Looking for splash picture.... found (1024x768, 17849 bytes).
Splash status on console 4 changed to on
Looking for splash picture.... found (1024x768, 17849 bytes).
Splash status on console 5 changed to on
Looking for splash picture.... found (1024x768, 17849 bytes).
Splash status on console 6 changed to on
Looking for splash picture.... found (1024x768, 17849 bytes).
Splash status on console 7 changed to on
Looking for splash picture.... found (1024x768, 17849 bytes).
Splash status on console 8 changed to on
Looking for splash picture.... found (1024x768, 17849 bytes).
Splash status on console 9 changed to on
Looking for splash picture.... found (1024x768, 17849 bytes).
Splash status on console 10 changed to on
Looking for splash picture.... found (1024x768, 17849 bytes).
Splash status on console 11 changed to on


lspci -

00:00.0 Class 0600: 8086:1130 (rev 02)
Subsystem: 1043:8027
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
Capabilities: <available only to root>

00:01.0 Class 0604: 8086:1131 (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: ee000000-efdfffff
Prefetchable memory behind bridge: eff00000-f7ffffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-

00:1e.0 Class 0604: 8086:244e (rev 11)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000b000-0000dfff
Memory behind bridge: ec800000-edffffff
Prefetchable memory behind bridge: efe00000-efefffff
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-

00:1f.0 Class 0601: 8086:2440 (rev 11)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0

00:1f.1 Class 0101: 8086:244b (rev 11) (prog-if 80 [Master])
Subsystem: 1043:8027
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 0: [virtual] I/O ports at 01f0
Region 1: [virtual] I/O ports at 03f4
Region 2: [virtual] I/O ports at 0170
Region 3: [virtual] I/O ports at 0374
Region 4: I/O ports at a800 [size=16]

00:1f.2 Class 0c03: 8086:2442 (rev 11)
Subsystem: 1043:8027
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 5
Region 4: I/O ports at a400 [size=32]

00:1f.3 Class 0c05: 8086:2443 (rev 11)
Subsystem: 1043:8027
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 10
Region 4: I/O ports at e800 [size=16]

00:1f.4 Class 0c03: 8086:2444 (rev 11)
Subsystem: 1043:8027
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 9
Region 4: I/O ports at a000 [size=32]

01:00.0 Class 0300: 10de:0110 (rev b2)
Subsystem: 1043:4031
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 248 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at ee000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Expansion ROM at efff0000 [disabled] [size=64K]
Capabilities: <available only to root>

02:0a.0 Class 0c00: 11c1:5811 (rev 04) (prog-if 10)
Subsystem: 1de1:5811
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (3000ns min, 6000ns max), cache line size 08
Interrupt: pin A routed to IRQ 9
Region 0: Memory at ed800000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <available only to root>

02:0b.0 Class 0780: 11c1:044c (rev 02)
Subsystem: 11c1:044c
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (63000ns min, 3500ns max)
Interrupt: pin A routed to IRQ 9
Region 0: Memory at ed000000 (32-bit, non-prefetchable) [size=256]
Region 1: I/O ports at d800 [size=8]
Region 2: I/O ports at d400 [size=256]
Capabilities: <available only to root>

02:0d.0 Class 0401: 1073:0012
Subsystem: 1073:0012
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (1250ns min, 6250ns max)
Interrupt: pin A routed to IRQ 9
Region 0: Memory at ec800000 (32-bit, non-prefetchable) [size=32K]
Region 1: I/O ports at d000 [size=64]
Region 2: I/O ports at b800 [size=4]
Capabilities: <available only to root>


После ввода команды lsmod говорит мол не знаю такой . Наверное для этого Линуха существует другая команда?

А так внешне Junior 2.2 мне намного больше понравился, нежели Red Hat 8.0. Решил на нем остановится. Ещё бы модем заработал было бы ваще замечательно.

[ruslandh]

mds
1 У Вас оба диска Junior 2.2 ? Насколько я знаю драйвера Lucenet в поставку AltLinux не входит.



Добавлено:

2 Удобней для него посмотреть выдачу lspcidrake