|
Компьютерный форум OSzone.net » Linux и FreeBSD » Общий по FreeBSD » Виртуальный хост |
|
Виртуальный хост
|
![]() Guest |
Зачем-то при добавлении вирт. хоста у меня он открывается тока на локальной машине, вот мой конфиг:
# # Based upon the NCSA server configuration files originally by Rob McCool. # # This is the main Apache server configuration file. It contains the # configuration directives that give the server its instructions. # See <URL:http://httpd.apache.org/docs-2.0/> for detailed information about # the directives. # # Do NOT simply read the instructions in here without understanding # what they do. They're here only as hints or reminders. If you are unsure # consult the online docs. You have been warned. # # The configuration directives are grouped into three basic sections: # 1. Directives that control the operation of the Apache server process as a # whole (the 'global environment'). # 2. Directives that define the parameters of the 'main' or 'default' server, # which responds to requests that aren't handled by a virtual host. # These directives also provide default values for the settings # of all virtual hosts. # 3. Settings for virtual hosts, which allow Web requests to be sent to # different IP addresses or hostnames and have them handled by the # same Apache server process. # # Configuration and logfile names: If the filenames you specify for many # of the server's control files begin with "/" (or "drive:/" for Win32), the # server will use that explicit path. If the filenames do *not* begin # with "/", the value of ServerRoot is prepended -- so "/var/log/foo.log" # with ServerRoot set to "/usr/local" will be interpreted by the # server as "/usr/local//var/log/foo.log". # ### Section 1: Global Environment # # The directives in this section affect the overall operation of Apache, # such as the number of concurrent requests it can handle or where it # can find its configuration files. # # # ServerRoot: The top of the directory tree under which the server's # configuration, error, and log files are kept. # # NOTE! If you intend to place this on an NFS (or otherwise network) # mounted filesystem then please read the LockFile documentation (available # at <URL:http://httpd.apache.org/docs-2.0/mod...l#lockfile>); # you will save yourself a lot of trouble. # # Do NOT add a slash at the end of the directory path. # ServerRoot "/usr/local" # # The accept serialization lock file MUST BE STORED ON A LOCAL DISK. # <IfModule !mpm_winnt.c> <IfModule !mpm_netware.c> #LockFile /var/log/accept.lock </IfModule> </IfModule> # # ScoreBoardFile: File used to store internal server process information. # If unspecified (the default), the scoreboard will be stored in an # anonymous shared memory segment, and will be unavailable to third-party # applications. # If specified, ensure that no two invocations of Apache share the same # scoreboard file. The scoreboard file MUST BE STORED ON A LOCAL DISK. # <IfModule !mpm_netware.c> <IfModule !perchild.c> #ScoreBoardFile /var/run/apache_runtime_status </IfModule> </IfModule> # # PidFile: The file in which the server should record its process # identification number when it starts. # <IfModule !mpm_netware.c> PidFile /var/run/httpd.pid </IfModule> # # Timeout: The number of seconds before receives and sends time out. # Timeout 300 # # KeepAlive: Whether or not to allow persistent connections (more than # one request per connection). Set to "Off" to deactivate. # KeepAlive On # # MaxKeepAliveRequests: The maximum number of requests to allow # during a persistent connection. Set to 0 to allow an unlimited amount. # We recommend you leave this number high, for maximum performance. # MaxKeepAliveRequests 100 # # KeepAliveTimeout: Number of seconds to wait for the next request from the # same client on the same connection. # KeepAliveTimeout 15 ## ## Server-Pool Size Regulation (MPM specific) ## # prefork MPM # StartServers: number of server processes to start # MinSpareServers: minimum number of server processes which are kept spare # MaxSpareServers: maximum number of server processes which are kept spare # MaxClients: maximum number of server processes allowed to start # MaxRequestsPerChild: maximum number of requests a server process serves <IfModule prefork.c> StartServers 5 MinSpareServers 5 MaxSpareServers 10 MaxClients 150 MaxRequestsPerChild 0 </IfModule> # worker MPM # StartServers: initial number of server processes to start # MaxClients: maximum number of simultaneous client connections # MinSpareThreads: minimum number of worker threads which are kept spare # MaxSpareThreads: maximum number of worker threads which are kept spare # ThreadsPerChild: constant number of worker threads in each server process # MaxRequestsPerChild: maximum number of requests a server process serves <IfModule worker.c> StartServers 2 MaxClients 150 MinSpareThreads 25 MaxSpareThreads 75 ThreadsPerChild 25 MaxRequestsPerChild 0 </IfModule> # perchild MPM # NumServers: constant number of server processes # StartThreads: initial number of worker threads in each server process # MinSpareThreads: minimum number of worker threads which are kept spare # MaxSpareThreads: maximum number of worker threads which are kept spare # MaxThreadsPerChild: maximum number of worker threads in each server process # MaxRequestsPerChild: maximum number of connections per server process <IfModule perchild.c> NumServers 5 StartThreads 5 MinSpareThreads 5 MaxSpareThreads 10 MaxThreadsPerChild 20 MaxRequestsPerChild 0 </IfModule> # WinNT MPM # ThreadsPerChild: constant number of worker threads in the server process # MaxRequestsPerChild: maximum number of requests a server process serves <IfModule mpm_winnt.c> ThreadsPerChild 250 MaxRequestsPerChild 0 </IfModule> # BeOS MPM # StartThreads: how many threads do we initially spawn? # MaxClients: max number of threads we can have (1 thread == 1 client) # MaxRequestsPerThread: maximum number of requests each thread will process <IfModule beos.c> StartThreads 10 MaxClients 50 MaxRequestsPerThread 10000 </IfModule> # NetWare MPM # ThreadStackSize: Stack size allocated for each worker thread # StartThreads: Number of worker threads launched at server startup # MinSpareThreads: Minimum number of idle threads, to handle request spikes # MaxSpareThreads: Maximum number of idle threads # MaxThreads: Maximum number of worker threads alive at the same time # MaxRequestsPerChild: Maximum number of requests a thread serves. It is # recommended that the default value of 0 be set for this # directive on NetWare. This will allow the thread to # continue to service requests indefinitely. <IfModule mpm_netware.c> ThreadStackSize 65536 StartThreads 250 MinSpareThreads 25 MaxSpareThreads 250 MaxThreads 1000 MaxRequestsPerChild 0 </IfModule> # OS/2 MPM # StartServers: Number of server processes to maintain # MinSpareThreads: Minimum number of idle threads per process, # to handle request spikes # MaxSpareThreads: Maximum number of idle threads per process # MaxRequestsPerChild: Maximum number of connections per server process <IfModule mpmt_os2.c> StartServers 2 MinSpareThreads 5 MaxSpareThreads 10 MaxRequestsPerChild 0 </IfModule> # # Listen: Allows you to bind Apache to specific IP addresses and/or # ports, instead of the default. See also the <VirtualHost> # directive. # # Change this to Listen on specific IP addresses as shown below to # prevent Apache from glomming onto all bound IP addresses (0.0.0.0) # #Listen 12.34.56.78:80 Listen 80 Listen elabuga-city.ru:81 # # Dynamic Shared Object (DSO) Support # # To be able to use the functionality of a module which was built as a DSO you # have to place corresponding `LoadModule' lines at this location so the # directives contained in it are actually available _before_ they are used. # Statically compiled modules (those listed by `httpd -l') do not need # to be loaded here. # # Example: # LoadModule foo_module modules/mod_foo.so # LoadModule access_module libexec/apache2/mod_access.so LoadModule auth_module libexec/apache2/mod_auth.so LoadModule auth_anon_module libexec/apache2/mod_auth_anon.so LoadModule auth_dbm_module libexec/apache2/mod_auth_dbm.so #LoadModule auth_digest_module libexec/apache2/mod_auth_digest.so #LoadModule file_cache_module libexec/apache2/mod_file_cache.so LoadModule charset_lite_module libexec/apache2/mod_charset_lite.so #LoadModule cache_module libexec/apache2/mod_cache.so #LoadModule disk_cache_module libexec/apache2/mod_disk_cache.so LoadModule include_module libexec/apache2/mod_include.so LoadModule deflate_module libexec/apache2/mod_deflate.so LoadModule log_config_module libexec/apache2/mod_log_config.so LoadModule logio_module libexec/apache2/mod_logio.so LoadModule env_module libexec/apache2/mod_env.so LoadModule mime_magic_module libexec/apache2/mod_mime_magic.so LoadModule cern_meta_module libexec/apache2/mod_cern_meta.so LoadModule expires_module libexec/apache2/mod_expires.so LoadModule headers_module libexec/apache2/mod_headers.so LoadModule usertrack_module libexec/apache2/mod_usertrack.so LoadModule unique_id_module libexec/apache2/mod_unique_id.so LoadModule setenvif_module libexec/apache2/mod_setenvif.so #LoadModule proxy_module libexec/apache2/mod_proxy.so #LoadModule proxy_connect_module libexec/apache2/mod_proxy_connect.so #LoadModule proxy_ftp_module libexec/apache2/mod_proxy_ftp.so #LoadModule proxy_http_module libexec/apache2/mod_proxy_http.so <IfDefine SSL> LoadModule ssl_module libexec/apache2/mod_ssl.so </IfDefine> LoadModule mime_module libexec/apache2/mod_mime.so #LoadModule dav_module libexec/apache2/mod_dav.so LoadModule status_module libexec/apache2/mod_status.so LoadModule autoindex_module libexec/apache2/mod_autoindex.so LoadModule asis_module libexec/apache2/mod_asis.so LoadModule info_module libexec/apache2/mod_info.so LoadModule cgi_module libexec/apache2/mod_cgi.so #LoadModule cgid_module libexec/apache2/mod_cgid.so #LoadModule dav_fs_module libexec/apache2/mod_dav_fs.so LoadModule vhost_alias_module libexec/apache2/mod_vhost_alias.so LoadModule negotiation_module libexec/apache2/mod_negotiation.so LoadModule dir_module libexec/apache2/mod_dir.so LoadModule imap_module libexec/apache2/mod_imap.so LoadModule actions_module libexec/apache2/mod_actions.so LoadModule speling_module libexec/apache2/mod_speling.so LoadModule userdir_module libexec/apache2/mod_userdir.so LoadModule alias_module libexec/apache2/mod_alias.so LoadModule rewrite_module libexec/apache2/mod_rewrite.so LoadModule php5_module libexec/apache2/libphp5.so # # ExtendedStatus controls whether Apache will generate "full" status # information (ExtendedStatus On) or just basic information (ExtendedStatus # Off) when the "server-status" handler is called. The default is Off. # #ExtendedStatus On ### Section 2: 'Main' server configuration # # The directives in this section set up the values used by the 'main' # server, which responds to any requests that aren't handled by a # <VirtualHost> definition. These values also provide defaults for # any <VirtualHost> containers you may define later in the file. # # All of these directives may appear inside <VirtualHost> containers, # in which case these default settings will be overridden for the # virtual host being defined. # <IfModule !mpm_winnt.c> <IfModule !mpm_netware.c> # # If you wish httpd to run as a different user or group, you must run # httpd as root initially and it will switch. # # User/Group: The name (or #number) of the user/group to run httpd as. # . On SCO (ODT 3) use "User nouser" and "Group nogroup". # . On HPUX you may not be able to use shared memory as nobody, and the # suggested workaround is to create a user www and use that user. # NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET) # when the value of (unsigned)Group is above 60000; # don't use Group #-1 on these systems! # User www Group www </IfModule> </IfModule> # # ServerAdmin: Your address, where problems with the server should be # e-mailed. This address appears on some server-generated pages, such # as error documents. e.g. admin@your-domain.com # ServerAdmin root@dplast-rt.ru # # ServerName gives the name and port that the server uses to identify itself. # This can often be determined automatically, but we recommend you specify # it explicitly to prevent problems during startup. # # If this is not set to valid DNS name for your host, server-generated # redirections will not work. See also the UseCanonicalName directive. # # If your host doesn't have a registered DNS name, enter its IP address here. # You will have to access it by its address anyway, and this will make # redirections work in a sensible way. # ServerName www.dplast-rt.ru # # UseCanonicalName: Determines how Apache constructs self-referencing # URLs and the SERVER_NAME and SERVER_PORT variables. # When set "Off", Apache will use the Hostname and Port supplied # by the client. When set "On", Apache will use the value of the # ServerName directive. # UseCanonicalName Off # # DocumentRoot: The directory out of which you will serve your # documents. By default, all requests are taken from this directory, but # symbolic links and aliases may be used to point to other locations. # DocumentRoot "/usr/local/www/data" # # Each directory to which Apache has access can be configured with respect # to which services and features are allowed and/or disabled in that # directory (and its subdirectories). # # First, we configure the "default" to be a very restrictive set of # features. # <Directory /> Options FollowSymLinks AllowOverride None </Directory> # # Note that from this point forward you must specifically allow # particular features to be enabled - so if something's not working as # you might expect, make sure that you have specifically enabled it # below. # # # This should be changed to whatever you set DocumentRoot to. # <Directory "/usr/local/www/data"> # # Possible values for the Options directive are "None", "All", # or any combination of: # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews # # Note that "MultiViews" must be named *explicitly* --- "Options All" # doesn't give it to you. # # The Options directive is both complicated and important. Please see # http://httpd.apache.org/docs-2.0/mod/core.html#options # for more information. # Options Indexes FollowSymLinks # # AllowOverride controls what directives may be placed in .htaccess files. # It can be "All", "None", or any combination of the keywords: # Options FileInfo AuthConfig Limit # AllowOverride None # # Controls who can get stuff from this server. # Order allow,deny Allow from all </Directory> # # UserDir: The name of the directory that is appended onto a user's home # directory if a ~user request is received. # UserDir public_html # # Control access to UserDir directories. The following is an example # for a site where these directories are restricted to read-only. # #<Directory /home/*/public_html> # AllowOverride FileInfo AuthConfig Limit Indexes # Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec # <Limit GET POST OPTIONS PROPFIND> # Order allow,deny # Allow from all # </Limit> # <LimitExcept GET POST OPTIONS PROPFIND> # Order deny,allow # Deny from all # </LimitExcept> #</Directory> # # DirectoryIndex: sets the file that Apache will serve if a directory # is requested. # # The index.html.var file (a type-map) is used to deliver content- # negotiated documents. The MultiViews Option can be used for the # same purpose, but it is much slower. # DirectoryIndex index.html index.htm index.php index.php3 index.phtml index.php4 # # AccessFileName: The name of the file to look for in each directory # for additional configuration directives. See also the AllowOverride # directive. # AccessFileName .htaccess # # The following lines prevent .htaccess and .htpasswd files from being # viewed by Web clients. # <Files ~ "^\.ht"> Order allow,deny Deny from all </Files> # # TypesConfig describes where the mime.types file (or equivalent) is # to be found. # TypesConfig etc/apache2/mime.types # # DefaultType is the default MIME type the server will use for a document # if it cannot otherwise determine one, such as from filename extensions. # If your server contains mostly text or HTML documents, "text/plain" is # a good value. If most of your content is binary, such as applications # or images, you may want to use "application/octet-stream" instead to # keep browsers from trying to display binary files as though they are # text. # DefaultType text/plain # # The mod_mime_magic module allows the server to use various hints from the # contents of the file itself to determine its type. The MIMEMagicFile # directive tells the module where the hint definitions are located. # <IfModule mod_mime_magic.c> MIMEMagicFile etc/apache2/magic </IfModule> # # HostnameLookups: Log the names of clients or just their IP addresses # e.g., www.apache.org (on) or 204.62.129.132 (off). # The default is off because it'd be overall better for the net if people # had to knowingly turn this feature on, since enabling it means that # each client request will result in AT LEAST one lookup request to the # nameserver. # HostnameLookups Off # # EnableMMAP: Control whether memory-mapping is used to deliver # files (assuming that the underlying OS supports it). # The default is on; turn this off if you serve from NFS-mounted # filesystems. On some systems, turning it off (regardless of # filesystem) can improve performance; for details, please see # http://httpd.apache.org/docs-2.0/mod...tml#enablemmap # #EnableMMAP off # # EnableSendfile: Control whether the sendfile kernel support is # used to deliver files (assuming that the OS supports it). # The default is on; turn this off if you serve from NFS-mounted # filesystems. Please see # http://httpd.apache.org/docs-2.0/mod...enablesendfile # #EnableSendfile off # # ErrorLog: The location of the error log file. # If you do not specify an ErrorLog directive within a <VirtualHost> # container, error messages relating to that virtual host will be # logged here. If you *do* define an error logfile for a <VirtualHost> # container, that host's errors will be logged there and not here. # ErrorLog /var/log/httpd-error.log # # LogLevel: Control the number of messages logged to the error_log. # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. # LogLevel warn # # The following directives define some format nicknames for use with # a CustomLog directive (see below). # LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common LogFormat "%{Referer}i -> %U" referer LogFormat "%{User-agent}i" agent # You need to enable mod_logio.c to use %I and %O #LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio # # The location and format of the access logfile (Common Logfile Format). # If you do not define any access logfiles within a <VirtualHost> # container, they will be logged here. Contrariwise, if you *do* # define per-<VirtualHost> access logfiles, transactions will be # logged therein and *not* in this file. # #CustomLog /var/log/httpd-access.log common # # If you would like to have agent and referer logfiles, uncomment the # following directives. # #CustomLog /var/log/httpd-referer.log referer #CustomLog /var/log/httpd-agent.log agent # # If you prefer a single logfile with access, agent, and referer information # (Combined Logfile Format) you can use the following directive. # CustomLog /var/log/httpd-access.log combined # # ServerTokens # This directive configures what you return as the Server HTTP response # Header. The default is 'Full' which sends information about the OS-Type # and compiled in modules. # Set to one of: Full | OS | Minor | Minimal | Major | Prod # where Full conveys the most information, and Prod the least. # ServerTokens Full # # Optionally add a line containing the server version and virtual host # name to server-generated pages (internal error documents, FTP directory # listings, mod_status and mod_info output etc., but not CGI generated # documents or custom error documents). # Set to "EMail" to also include a mailto: link to the ServerAdmin. # Set to one of: On | Off | EMail # ServerSignature On # # Aliases: Add here as many aliases as you need (with no limit). The format is # Alias fakename realname # # Note that if you include a trailing / on fakename then the server will # require it to be present in the URL. So "/icons" isn't aliased in this # example, only "/icons/". If the fakename is slash-terminated, then the # realname must also be slash terminated, and if the fakename omits the # trailing slash, the realname must also omit it. # # We include the /icons/ alias for FancyIndexed directory listings. If you # do not use FancyIndexing, you may comment this out. # Alias /icons/ "/usr/local/www/icons/" <Directory "/usr/local/www/icons"> Options Indexes MultiViews AllowOverride None Order allow,deny Allow from all </Directory> # # This should be changed to the ServerRoot/manual/. The alias provides # the manual, even if you choose to move your DocumentRoot. You may comment # this out if you do not care for the documentation. # AliasMatch ^/manual(?:/(?:de|en|fr|ja|ko|ru))?(/.*)?$ "/usr/local/share/doc/apache2$1" <Directory "/usr/local/share/doc/apache2"> Options Indexes AllowOverride None Order allow,deny Allow from all <Files *.html> SetHandler type-map </Files> SetEnvIf Request_URI ^/manual/de/ prefer-language=de SetEnvIf Request_URI ^/manual/en/ prefer-language=en SetEnvIf Request_URI ^/manual/fr/ prefer-language=fr SetEnvIf Request_URI ^/manual/ja/ prefer-language=ja SetEnvIf Request_URI ^/manual/ko/ prefer-language=ko SetEnvIf Request_URI ^/manual/ru/ prefer-language=ru RedirectMatch 301 ^/manual(?:/(de|en|fr|ja|ko|ru)){2,}(/.*)?$ /manual/$1$2 </Directory> # # ScriptAlias: This controls which directories contain server scripts. # ScriptAliases are essentially the same as Aliases, except that # documents in the realname directory are treated as applications and # run by the server when requested rather than as documents sent to the client. # The same rules about trailing "/" apply to ScriptAlias directives as to # Alias. # ScriptAlias /cgi-bin/ "/usr/local/www/cgi-bin/" <IfModule mod_cgid.c> # # Additional to mod_cgid.c settings, mod_cgid has Scriptsock <path> # for setting UNIX socket for communicating with cgid. # #Scriptsock /var/run/cgisock </IfModule> # # "/usr/local/www/cgi-bin" should be changed to whatever your ScriptAliased # CGI directory exists, if you have that configured. # <Directory "/usr/local/www/cgi-bin"> AllowOverride None Options None Order allow,deny Allow from all </Directory> # # Redirect allows you to tell clients about documents which used to exist in # your server's namespace, but do not anymore. This allows you to tell the # clients where to look for the relocated document. # Example: # Redirect permanent /foo http://www.example.com/bar # # Directives controlling the display of server-generated directory listings. # # # IndexOptions: Controls the appearance of server-generated directory # listings. # IndexOptions FancyIndexing VersionSort # # AddIcon* directives tell the server which icon to show for different # files or filename extensions. These are only displayed for # FancyIndexed directories. # AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip AddIconByType (TXT,/icons/text.gif) text/* AddIconByType (IMG,/icons/image2.gif) image/* AddIconByType (SND,/icons/sound2.gif) audio/* AddIconByType (VID,/icons/movie.gif) video/* AddIcon /icons/binary.gif .bin .exe AddIcon /icons/binhex.gif .hqx AddIcon /icons/tar.gif .tar AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip AddIcon /icons/a.gif .ps .ai .eps AddIcon /icons/layout.gif .html .shtml .htm .pdf AddIcon /icons/text.gif .txt AddIcon /icons/c.gif .c AddIcon /icons/p.gif .pl .py AddIcon /icons/f.gif .for AddIcon /icons/dvi.gif .dvi AddIcon /icons/uuencoded.gif .uu AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl AddIcon /icons/tex.gif .tex AddIcon /icons/bomb.gif core AddIcon /icons/back.gif .. AddIcon /icons/hand.right.gif README AddIcon /icons/folder.gif ^^DIRECTORY^^ AddIcon /icons/blank.gif ^^BLANKICON^^ # # DefaultIcon is which icon to show for files which do not have an icon # explicitly set. # DefaultIcon /icons/unknown.gif # # AddDescription allows you to place a short description after a file in # server-generated indexes. These are only displayed for FancyIndexed # directories. # Format: AddDescription "description" filename # #AddDescription "GZIP compressed document" .gz #AddDescription "tar archive" .tar #AddDescription "GZIP compressed tar archive" .tgz # # ReadmeName is the name of the README file the server will look for by # default, and append to directory listings. # # HeaderName is the name of a file which should be prepended to # directory indexes. ReadmeName README.html HeaderName HEADER.html # # IndexIgnore is a set of filenames which directory indexing should ignore # and not include in the listing. Shell-style wildcarding is permitted. # IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t # # DefaultLanguage and AddLanguage allows you to specify the language of # a document. You can then use content negotiation to give a browser a # file in a language the user can understand. # # Specify a default language. This means that all data # going out without a specific language tag (see below) will # be marked with this one. You probably do NOT want to set # this unless you are sure it is correct for all cases. # # * It is generally better to not mark a page as # * being a certain language than marking it with the wrong # * language! # # DefaultLanguage nl # # Note 1: The suffix does not have to be the same as the language # keyword --- those with documents in Polish (whose net-standard # language code is pl) may wish to use "AddLanguage pl .po" to # avoid the ambiguity with the common suffix for perl scripts. # # Note 2: The example entries below illustrate that in some cases # the two character 'Language' abbreviation is not identical to # the two character 'Country' code for its country, # E.g. 'Danmark/dk' versus 'Danish/da'. # # Note 3: In the case of 'ltz' we violate the RFC by using a three char # specifier. There is 'work in progress' to fix this and get # the reference data for rfc1766 cleaned up. # # Catalan (ca) - Croatian (hr) - Czech (cs) - Danish (da) - Dutch (nl) # English (en) - Esperanto (eo) - Estonian (et) - French (fr) - German (de) # Greek-Modern (el) - Hebrew (he) - Italian (it) - Japanese (ja) # Korean (ko) - Luxembourgeois* (ltz) - Norwegian Nynorsk (nn) # Norwegian (no) - Polish (pl) - Portugese (pt) # Brazilian Portuguese (pt-BR) - Russian (ru) - Swedish (sv) # Simplified Chinese (zh-CN) - Spanish (es) - Traditional Chinese (zh-TW) # AddLanguage ru .ru # # LanguagePriority allows you to give precedence to some languages # in case of a tie during content negotiation. # # Just list the languages in decreasing order of preference. We have # more or less alphabetized them here. You probably want to change this. # LanguagePriority ru # # ForceLanguagePriority allows you to serve a result page rather than # MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback) # [in case no accepted languages matched the available variants] # ForceLanguagePriority Prefer Fallback # # Specify a default charset for all pages sent out. This is # always a good idea and opens the door for future internationalisation # of your web site, should you ever want it. Specifying it as # a default does little harm; as the standard dictates that a page # is in iso-8859-1 (latin1) unless specified otherwise i.e. you # are merely stating the obvious. There are also some security # reasons in browsers, related to javascript and URL parsing # which encourage you to always set a default char set. # AddDefaultCharset Windows-1251 AddType application/x-httpd-php .php # # Commonly used filename extensions to character sets. You probably # want to avoid clashes with the language extensions, unless you # are good at carefully testing your setup after each change. # See http://www.iana.org/assignments/character-sets for the # official list of charset names and their respective RFCs. # #AddCharset ISO-8859-1 .iso8859-1 .latin1 #AddCharset ISO-8859-2 .iso8859-2 .latin2 .cen #AddCharset ISO-8859-3 .iso8859-3 .latin3 #AddCharset ISO-8859-4 .iso8859-4 .latin4# #AddCharset ISO-8859-5 .iso8859-5 .latin5 .cyr .iso-ru #AddCharset ISO-8859-6 .iso8859-6 .latin6 .arb #AddCharset ISO-8859-7 .iso8859-7 .latin7 .grk #AddCharset ISO-8859-8 .iso8859-8 .latin8 .heb #AddCharset ISO-8859-9 .iso8859-9 .latin9 .trk #AddCharset ISO-2022-JP .iso2022-jp .jis #AddCharset ISO-2022-KR .iso2022-kr .kis #AddCharset ISO-2022-CN .iso2022-cn .cis #AddCharset Big5 .Big5 .big5 ## For russian, more than one charset is used (depends on client, mostly): #AddCharset WINDOWS-1251 .cp-1251 .win-1251 #AddCharset CP866 .cp866 #AddCharset KOI8-r .koi8-r .koi8-ru #AddCharset KOI8-ru .koi8-uk .ua #AddCharset ISO-10646-UCS-2 .ucs2 #AddCharset ISO-10646-UCS-4 .ucs4 #AddCharset UTF-8 .utf8 # The set below does not map to a specific (iso) standard # but works on a fairly wide range of browsers. Note that # capitalization actually matters (it should not, but it # does for some browsers). # # See http://www.iana.org/assignments/character-sets # for a list of sorts. But browsers support few. # #AddCharset GB2312 .gb2312 .gb #AddCharset utf-7 .utf7 #AddCharset utf-8 .utf8 #AddCharset big5 .big5 .b5 #AddCharset EUC-TW .euc-tw #AddCharset EUC-JP .euc-jp #AddCharset EUC-KR .euc-kr #AddCharset shift_jis .sjis# # # AddType allows you to add to or override the MIME configuration # file mime.types for specific file types. # #AddType application/x-tar .tgz # # AddEncoding allows you to have certain browsers uncompress # information on the fly. Note: Not all browsers support this. # Despite the name similarity, the following Add* directives have nothing # to do with the FancyIndexing customization directives above. # #AddEncoding x-compress .Z #AddEncoding x-gzip .gz .tgz # # If the AddEncoding directives above are commented-out, then you # probably should define those extensions to indicate media types: # AddType application/x-compress .Z AddType application/x-gzip .gz .tgz # # AddHandler allows you to map certain file extensions to "handlers": # actions unrelated to filetype. These can be either built into the server # or added with the Action directive (see below) # # To use CGI scripts outside of ScriptAliased directories: # (You will also need to add "ExecCGI" to the "Options" directive.) # #AddHandler cgi-script .cgi # # For files that include their own HTTP headers: # #AddHandler send-as-is asis # # For server-parsed imagemap files: # #AddHandler imap-file map # # For type maps (negotiated resources): # (This is enabled by default to allow the Apache "It Worked" page # to be distributed in multiple languages.) # AddHandler type-map var # # Filters allow you to process content before it is sent to the client. # # To parse .shtml files for server-side includes (SSI): # (You will also need to add "Includes" to the "Options" directive.) # #AddType text/html .shtml #AddOutputFilter INCLUDES .shtml # # Action lets you define media types that will execute a script whenever # a matching file is called. This eliminates the need for repeated URL # pathnames for oft-used CGI file processors. # Format: Action media/type /cgi-script/location # Format: Action handler-name /cgi-script/location # # # Customizable error responses come in three flavors: # 1) plain text 2) local redirects 3) external redirects # # Some examples: #ErrorDocument 500 "The server made a boo boo." #ErrorDocument 404 /missing.html #ErrorDocument 404 "/cgi-bin/missing_handler.pl" #ErrorDocument 402 http://www.example.com/subscription_info.html # # # Putting this all together, we can internationalize error responses. # # We use Alias to redirect any /error/HTTP_<error>.html.var response to # our collection of by-error message multi-language collections. We use # includes to substitute the appropriate text. # # You can modify the messages' appearance without changing any of the # default HTTP_<error>.html.var files by adding the line: # # Alias /error/include/ "/your/include/path/" # # which allows you to create your own set of files by starting with the # /usr/local/www/error/include/ files and copying them to /your/include/path/, # even on a per-VirtualHost basis. The default include files will display # your Apache version number and your ServerAdmin email address regardless # of the setting of ServerSignature. # # The internationalized error documents require mod_alias, mod_include # and mod_negotiation. To activate them, uncomment the following 30 lines. # Alias /error/ "/usr/local/www/error/" # # <Directory "/usr/local/www/error"> # AllowOverride None # Options IncludesNoExec # AddOutputFilter Includes html # AddHandler type-map var # Order allow,deny # Allow from all # LanguagePriority en cs de es fr it nl sv pt-br ro # ForceLanguagePriority Prefer Fallback # </Directory> # # ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var # ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var # ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var # ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var # ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var # ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var # ErrorDocument 410 /error/HTTP_GONE.html.var # ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var # ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var # ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var # ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var # ErrorDocument 415 /error/HTTP_UNSUPPORTED_MEDIA_TYPE.html.var # ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var # ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var # ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var # ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var # ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var # # The following directives modify normal HTTP response behavior to # handle known problems with browser implementations. # BrowserMatch "Mozilla/2" nokeepalive BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0 BrowserMatch "RealPlayer 4\.0" force-response-1.0 BrowserMatch "Java/1\.0" force-response-1.0 BrowserMatch "JDK/1\.0" force-response-1.0 # # The following directive disables redirects on non-GET requests for # a directory that does not include the trailing slash. This fixes a # problem with Microsoft WebFolders which does not appropriately handle # redirects for folders with DAV methods. # Same deal with Apple's DAV filesystem and Gnome VFS support for DAV. # BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully BrowserMatch "^WebDrive" redirect-carefully BrowserMatch "^WebDAVFS/1.[012]" redirect-carefully BrowserMatch "^gnome-vfs" redirect-carefully # # Allow server status reports generated by mod_status, # with the URL of http://servername/server-status # Change the ".example.com" to match your domain to enable. # #<Location /server-status> # SetHandler server-status # Order deny,allow # Deny from all # Allow from .example.com #</Location> # # Allow remote server configuration reports, with the URL of # http://servername/server-info (requires that mod_info.c be loaded). # Change the ".example.com" to match your domain to enable. # #<Location /server-info> # SetHandler server-info # Order deny,allow # Deny from all # Allow from .example.com #</Location> # # Bring in additional module-specific configurations # <IfModule mod_ssl.c> Include etc/apache2/ssl.conf </IfModule> ### Section 3: Virtual Hosts # # VirtualHost: If you want to maintain multiple domains/hostnames on your # machine you can setup VirtualHost containers for them. Most configurations # use only name-based virtual hosts so the server doesn't need to worry about # IP addresses. This is indicated by the asterisks in the directives below. # # Please see the documentation at # <URL:http://httpd.apache.org/docs-2.0/vhosts/> # for further details before you try to setup virtual hosts. # # You may use the command line option '-S' to verify your virtual host # configuration. # # Use name-based virtual hosting. # NameVirtualHost elabuga-city.ru # # VirtualHost example: # Almost any Apache directive may go into a VirtualHost container. # The first VirtualHost section is used for requests without a known # server name. # <VirtualHost elabuga-city.ru> ServerAdmin root@dplast-rt.ru DocumentRoot /usr/local/www/elabuga ServerName elabuga-city.ru ErrorLog /var/log/dummy-host.example.com-error_log CustomLog /var/log/dummy-host.example.com-access_log common </VirtualHost> Файл /etc/hosts: ::1 localhost.dplast-rt.ru localhost 127.0.0.1 localhost.dplast-rt.ru localhost 217.118.179.78 dplast-rt.ru dplast-rt 217.118.179.78 dplast-rt.ru 10.0.0.3 ppp01 dplast-rt.ru 217.118.179.78 elabuga-city.ru Что делать? |
|
Отправлено: 12:00, 16-10-2004 |
Ветеран Сообщения: 659
|
Профиль | Отправить PM | Цитировать хм, а как он еще должен открываться, если адрес (elabuga-city.ru) прописан только на локальной машине?
|
Отправлено: 13:06, 16-10-2004 | #2 |
Для отключения данного рекламного блока вам необходимо зарегистрироваться или войти с учетной записью социальной сети. Если же вы забыли свой пароль на форуме, то воспользуйтесь данной ссылкой для восстановления пароля. |
![]() Guest |
не только ещё он есть на ДНС сервере, и что делать?
|
Отправлено: 14:45, 16-10-2004 | #3 |
just mar Сообщения: 3904
|
Профиль | Отправить PM | Цитировать Цитата:
|
|
Отправлено: 15:15, 16-10-2004 | #4 |
![]() Guest |
А возможно это из-за того что на днс сервере у домена указан порт 80?? Хотя сайт будет на 81.
mar, чего? |
|
Отправлено: 15:37, 16-10-2004 | #5 |
![]() Редкий гость Сообщения: 1769
|
Профиль | Сайт | Отправить PM | Цитировать NameVirtualHost *:80
ну а потом: <VirtualHost *:80> после чего запускаем httpd -S и проверяем Добавлено: Цитата RTFM:
|
|
------- Отправлено: 05:02, 17-10-2004 | #6 |
Ветеран Сообщения: 659
|
Профиль | Отправить PM | Цитировать Guest
Цитата:
Какой смысл гонять виртуальный сайт на другом порту? Для ответа опять же не хватает денных в вопросе ![]() нужен вывод комманд с клиентских машин: nslookup elabuga-city.ru что грит lynx http://elabuga-city.ru и если менялся конфиг апача, то кусок про виртуальные хосты... |
|
Отправлено: 18:31, 17-10-2004 | #7 |
just mar Сообщения: 3904
|
Профиль | Отправить PM | Цитировать да уж - читать весь конфиг апача как-то несколько в лом
![]() |
Отправлено: 19:28, 17-10-2004 | #8 |
![]() |
Участник сейчас на форуме |
![]() |
Участник вне форума |
![]() |
Автор темы |
![]() |
Сообщение прикреплено |
| |||||
Название темы | Автор | Информация о форуме | Ответов | Последнее сообщение | |
Прочее - Не доступен хост вдруг стал. | poisonkit | Сетевые технологии | 3 | 19-05-2009 14:42 | |
EventID - Ошибка хост-процесса Rundll32 | christi | Устранение критических ошибок Windows | 0 | 31-10-2007 09:32 | |
Лучший хост для Сайта? | InSpEkToRzzz | Вебмастеру | 4 | 14-12-2005 09:27 | |
хост на линухе | Alexir | Общий по Linux | 11 | 16-04-2004 09:11 | |
Закачка на хост MySQL базы | Terabyte | Вебмастеру | 1 | 31-01-2003 16:10 |
|