а логи-то для k3b где взять?вывод для отладки после ошибки вот.
System
-----------------------
K3b Version: 0.12.17
KDE Version: 3.5.5
QT Version: 3.3.7
Kernel: 2.6.17-2-686
Devices
-----------------------
ATAPI COMBO 48X24 E.NA (/dev/hdb, ) at /media/cdrom1 [CD-R; CD-RW; CD-ROM; DVD-ROM] [DVD-ROM; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R]
_NEC DVD_RW ND-3540A 1.01 (/dev/hdd, ) at /media/cdrom0 [CD-R; CD-RW; CD-ROM; DVD-ROM; DVD-R; DVD-RW; DVD-R DL; DVD+R; DVD+RW; DVD+R DL] [DVD-ROM; DVD-R с поддержкой мультисессий; Двухслойный DVD-R с поддержкой мультисессий; DVD-RW с ограниченной перезаписью; DVD-RW с поддержкой мультисессий; DVD+RW; DVD+R; Двухслойный DVD+R; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96R; RAW/R96R; Ограниченная перезапись]
K3b
-----------------------
Size of filesystem calculated: 327
Used versions
-----------------------
cdrecord: 2.1.1a03
cdrecord
-----------------------
This is wodim, not cdrecord. Don't expect it to behave like cdrecord in any
way, don't refer to it as "cdrecord". Send problem reports to
debburn-devel@lists.alioth.debian.org, don't bother Joerg Schilling with any
problems caused by this application.
Copyright (C) 2006 cdrkit maintainers, (C) 1994-2006 Joerg Schilling
scsidev: '/dev/hdb'
devname: '/dev/hdb'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
/usr/bin/X11/wodim: Warning: using inofficial version of libscg (debburn project-0.8ubuntu1+debburn1 '@(#)scsitransp.c 1.91 04/06/17 Copyright 1988,1995,2000-2004 J. Schilling').
/usr/bin/X11/wodim: Warning: using inofficial libscg transport code version (cdrkit-team-scsi-linux-sg.c-1.86 '@(#)scsi-linux-sg.c 1.86 05/11/22 Copyright 1997 J. Schilling').
SCSI buffer size: 64512
TOC Type: 3 = CD-ROM XA mode 2
Warning: This version of libscg has not been configured via the standard
autoconfiguration method of the Schily makefile system. There is a high risk
that the code is not configured correctly and for this reason will not behave
as expected.
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'ATAPI '
Identifikation : 'COMBO 48X24 '
Revision : 'E.NA'
Device seems to be: Generic mmc2 DVD-ROM.
Current: 0x000A
Profile: 0x000A (current)
Profile: 0x0009
Profile: 0x0008
Profile: 0x0010
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1951488 = 1905 KB
FIFO size : 4194304 = 4096 KB
/usr/bin/X11/wodim: Drive needs to reload the media to return to proper status.
/usr/bin/X11/wodim: Cannot get next writable address for 'invisible' track.
/usr/bin/X11/wodim: This means that we are checking recorded media.
/usr/bin/X11/wodim: This media cannot be written in streaming mode anymore.
/usr/bin/X11/wodim: If you like to write to 'preformatted' RW media, try to blank the media first.
Track 01: data 0 MB
Total size: 0 MB (00:04.38) = 329 sectors
Lout start: 1 MB (00:06/29) = 329 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 3
Reference speed: 6
Is not unrestricted
Is erasable
Disk sub type: High speed Rewritable (CAV) media (1)
ATIP start of lead in: -11240 (97:32/10)
ATIP start of lead out: 359849 (79:59/74)
1T speed low: 4 1T speed high: 10
2T speed low: 4 2T speed high: 0 (reserved val 6)
power mult factor: 1 5
recommended erase/write power: 5
A1 values: 24 1A D8
A2 values: 26 B2 4A
Disk type: Phase change
Manuf. index: 27
Manufacturer: Prodisc Technology Inc.
Trying to clear drive status.
Speed set to 2114 KB/s
Speed set to 2114 KB/s
Starting to write CD/DVD at speed 12.0 in real TAO mode for multi session.
Last chance to quit, starting real write in 2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is OFF.
Turning BURN-Free on
Performing OPC...
Writing time: 0.798s
Average write speed 565.1x.
Fixating...
/usr/bin/X11/wodim: Success. read track info: scsi sendcmd: no error
CDB: 52 01 00 00 00 FF 00 00 1C 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 30 06 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x06 (cannot format medium - incompatible medium) Fru 0x0
Sense flags: Blk 0 (not valid)
resid: 28
cmd finished after 0.000s timeout 240s
/usr/bin/X11/wodim: Cannot get next writable address for 'invisible' track.
/usr/bin/X11/wodim: This means that we are checking recorded media.
/usr/bin/X11/wodim: This media cannot be written in streaming mode anymore.
/usr/bin/X11/wodim: If you like to write to 'preformatted' RW media, try to blank the media first.
/usr/bin/X11/wodim: Cannot get next writable address.
Fixating time: 0.001s
BURN-Free was never needed.
cdrecord command:
-----------------------
/usr/bin/X11/wodim -v gracetime=2 dev=/dev/hdb speed=12 -tao driveropts=burnfree -eject -multi -xa -tsize=327s -
mkisofs
-----------------------
327
I: -input-charset not specified, using UTF-8 (detected in locale settings)
Total translation table size: 0
Total rockridge attributes bytes: 4440
Total directory bytes: 20480
Path table size(bytes): 144
Max brk space used 0
327 extents written (0 MB)
mkisofs command:
-----------------------
/usr/bin/X11/mkisofs -gui -graft-points -volid K3b data project -volset -appid K3B THE CD KREATOR (C) 1998-2005 SEBASTIAN TRUEG AND THE K3B TEAM -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-root/k3byq2Rob.tmp -rational-rock -hide-list /tmp/kde-root/k3bKKMCJb.tmp -joliet -hide-joliet-list /tmp/kde-root/k3bxyhh7a.tmp -full-iso9660-filenames -iso-level 2 -path-list /tmp/kde-root/k3bi05Rua.tmp
это одна из многих ошибок выдаваемых k3b.
