Новый участник
Сообщения: 15
Благодарности: 0
|
Профиль
|
Отправить PM
| Цитировать
Модер Железа, нет, больше отклонений я не замечал.
SMART: Current UDMA Mode is 5
UDMA Modes 0,1,2,3,4,5 are supported.
Removable media is not supported
Power management is supported/enabled
PACKET command is not supported
Write cache is supported/enabled
Look-ahead is supported/disabled
Release interrupt is not supported
Service interrupt is supported/enabled
Device reset is supported/enabled
Host protected area feature is supported/enabled
WRITE BUFFER command is supported/enabled
READ BUFFER command is supported/enabled
Read/write DMA Queued commands are supported/enabled
CFA feature set is supported/enabled
Advanced power management feature set is supported/enabled
Removable media feature set is supported/enabled
Standby timers are supported
IORDY is not supported
PIO data transfer mode: (2) Rate=8.3 MB/sec
Minimum multiword DMA cycle time per word in nanoseconds: 120
Manufacturer's recommended multiword DMA cycle time per word in nanoseconds: 120
Minimum PIO transfer cycle time without flow control in nanoseconds: 240
Minimum PIO transfer cycle time with IORDY flow control in nanoseconds: 120
Usable addressable sectors (LBA mode only): 156,299,375
No Multiword DMA Modes are selected
Multiword DMA Mode (2) and below are supported.
PIO Mode (4) is supported.
Current # of sectors transferrable per interrupt on READ/WRITE multiple commands: 16
Max # sectors transferrable per interrupt on READ/WRITE multiple commands: 16
Security is supported
* Drive security status: Maximum
* Enhanced security erase is not supported
* Security is disabled
|
Отправлено: 16:18, 20-01-2005
| #10
|