[Angry Demon]

Принтер печатает только с одним из скаченных драйверов

Печатает из откуда и что?

Общее Руководство пользователя.
С помощбю Plot Assistant, я так понимаю, вы не пытались печатать?

Каждый по очереди ставил, по инструкции из первого поста

Начнём с того, что инструкции для разных драйверов слегка разные.

Цитата

Basic Print Service Clients and Drivers
Configurations
These are the latest recommended configuration for BPS elements and
Windows Clients and Drivers.
BPS 6030, 6050 Elements
CP-Controller v4.2.02
IIT v3.0.0
IOT v3.3.0.0
BPS 6204 Elements
CP-Controller v1.2.07
IIT v1.0.0.3
IOT v1.1.07
Clients
BT-PlotAssistant v3.5.0.2
Network TWAIN driver v1.0.3
Wide Format Scan Service v1.5.3.4
Drivers
TIFF (GDI) v3.2.4.91 32-Bit & 64-Bit
PostScript driver v1.0.3 32-Bit & 64-Bit

Installing TIFF or PostScript Drivers on Windows Vista, Windows
7 & Windows 2008 (R2)
1. Unzip the file to a temporary folder if necessary.
2. Go to Control Panel. On Windows 7 go to Hardware and Sound, Devices
and Printers; on Windows Vista got to Hardware and Sound, Printer; on
Windows 2008 (R2) go to Printers. Click on Add a Printer.
3. Select Add a local printer and deselect Automatically detect and install
plug and play printer. Click Next.
4. Click the radio button Create a new port and select Standard TCP/IP Port
from the Type of port dropdown box, then click Next.
5. On the next screen chose TCP/IP Device, enter the IP address, or host
name. Click Next.
6. Click the Custom radio button and Settings… button
7. Enable the LPR radio button. For the Queue Name enter plt00t if installing
TIFF driver or enter plt00a if installing PS driver. Check the checkbox LPR
Byte Counting Enable and click OK button then click Next.
8. On the Install the printer driver screen click Have Disk… button and
browse to where the file was unzipped.
a. Find and highlight the fxezui.inf file if installing TIFF driver or
xrpskmei file if installing the PS driver for 6030/6050 or xrpsryei
file if installing the PS driver for 6204. Click the Open button
then OK button.
b. Highlight the appropriate Xerox Wide Format printer and click
Next.
9. On the next screen enter a printer name or accept the default printer name
and click Next.
10. During install a Windows Security alert may appear stating that “Windows
can’t verify the publisher of this driver software”. This is normal
behaviour click “Install this driver software anyway” to continue.
11. To verify that the printer is working properly, click Print a test page from
the printer properties.

Если ещё и руссифицированный будет - вообще шоколад!

Закажите у Xerox русификацию.