Цитата YesWorld:
|
и это не скриншот, а фото с моего сервера. »
|
попутал картинку с Вашими словами насчет другого/старого сервера.
Давайте тогда дальше, предложенным шагам, разбираться.
Это сделали?
Скрытый текст
Цитата:
2-1 Configuring the AMI BIOS for SATA RAID Settings
You may need to configure RAID setings in the BIOS before using the PCH RAID
configuration utility. Follow the below instructions to ensure the BIOS is configured
for SATA RAID.
1. Press the <Delete> key during system boot to enter the BIOS Setup Utility.
2. Use the arrow keys to select in the BIOS menu bar at the top of
the screen.
3. In the menu, navigate to SATA Configurationand press <Enter>
to enter the SATA Configuration submenu.
4. In the SATA configuration submenu, navigate to SATA Modeand press <Enter>.
The Options window displays.
5. From the Options window, highlight RAIDand press <Enter> to select it.
6. In the menu, navigate to SCU Configurationand press <Enter>
to enter the SCU configuration submenu.
7. In the SCU Configuration submenu, make sure that Storage Controller Unit
and OnChip SCU Option ROMare set to Enabled.
8. Press <ESC> to return to the previous menu and use the arrow keys to select
from the BIOS menu bar.
|
Предложенные RSTe RAID драйвера смотрели/проверяли?
