smartctl 6.3 2014-07-26 r3976 [i686-w64-mingw32-xp-sp3] (sf-6.3-1)
Copyright (C) 2002-14, Bruce Allen, Christian Franke,
www.smartmontools.org
Warning: Limited functionality due to missing admin rights
=== START OF INFORMATION SECTION ===
Model Family: Seagate Maxtor DiamondMax 22
Device Model: MAXTOR STM3160813AS
Serial Number: [No Information Found]
Firmware Version: MX13
Device is: In smartctl database [for details use: -P show]
ATA Version is: [No Information Found]
Local Time is: Tue Dec 30 15:22:02 2014 RTZST
==> WARNING: There are known problems with these drives,
see the following Seagate web pages:
http://knowledge.seagate.com/article...S/FAQ/207931en
http://knowledge.seagate.com/article...S/FAQ/207969en
http://knowledge.seagate.com/article...S/FAQ/207975en
SMART support is: Available - device has SMART capability.
Enabled status cached by OS, trying SMART RETURN STATUS cmd.
SMART support is: Enabled
Read SMART Thresholds failed: Function not implemented
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 609) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 34) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 118 099 --- Pre-fail Always - 167941886
3 Spin_Up_Time 0x0003 097 097 --- Pre-fail Always - 0
4 Start_Stop_Count 0x0032 099 099 --- Old_age Always - 1438
5 Reallocated_Sector_Ct 0x0033 100 100 --- Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 081 060 --- Pre-fail Always - 133916657
9 Power_On_Hours 0x0032 087 087 --- Old_age Always - 11634
10 Spin_Retry_Count 0x0013 100 100 --- Pre-fail Always - 2
12 Power_Cycle_Count 0x0032 099 099 --- Old_age Always - 1438
184 End-to-End_Error 0x0032 100 100 --- Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 --- Old_age Always - 0
188 Command_Timeout 0x0032 100 099 --- Old_age Always - 12
189 High_Fly_Writes 0x003a 097 097 --- Old_age Always - 3
190 Airflow_Temperature_Cel 0x0022 066 056 --- Old_age Always - 34 (Min/Max 22/35)
194 Temperature_Celsius 0x0022 034 044 --- Old_age Always - 34 (0 13 0 0 0)
195 Hardware_ECC_Recovered 0x001a 046 034 --- Old_age Always - 167941886
197 Current_Pending_Sector 0x0012 100 100 --- Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 --- Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 --- Old_age Always - 0
Read SMART Error Log failed: Function requires admin rights
Read SMART Self-test Log failed: Function requires admin rights
Read SMART Selective Self-test Log failed: Function requires admin rights
