Вывод sudo lspci -v
читать дальше »
00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 01)
Subsystem: Giga-byte Technology GA-8PE667 Ultra
Flags: bus master, fast devsel, latency 0
Memory at d0000000 (32-bit, prefetchable) [size=256M]
Capabilities: [e4] Vendor Specific Information: Len=05 <?>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 01) (prog-if 00 [VGA controller])
Subsystem: Giga-byte Technology Device 2562
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at e0000000 (32-bit, prefetchable) [size=128M]
Memory at ea000000 (32-bit, non-prefetchable) [size=512K]
Expansion ROM at <unassigned> [disabled]
Capabilities: [d0] Power Management version 1
Kernel driver in use: i915
00:1d.0 USB controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device 24c2
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at d800 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device 24c2
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at d000 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device 24c2
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at d400 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology Device 5006
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at ea080000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 81) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: e8000000-e9ffffff
Prefetchable memory behind bridge: 20000000-200fffff
00:1f.0 ISA bridge: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge (rev 01)
Flags: bus master, medium devsel, latency 0
00:1f.1 IDE interface: Intel Corporation 82801DB (ICH4) IDE Controller (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: Giga-byte Technology GA-8PE667 Ultra
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at 01f0 [size=8]
I/O ports at 03f4 [size=1]
I/O ports at 0170 [size=8]
I/O ports at 0374 [size=1]
I/O ports at f000 [size=16]
Memory at 20100000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: ata_piix
00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 01)
Subsystem: Giga-byte Technology GA-8PE667 Ultra
Flags: medium devsel, IRQ 17
I/O ports at 5000 [size=32]
Kernel driver in use: i801_smbus
01:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Compex FN22-3(A) LinxPRO Ethernet Adapter
Flags: bus master, medium devsel, latency 32, IRQ 22
I/O ports at c000 [size=256]
Memory at e9000000 (32-bit, non-prefetchable) [size=256]
[virtual] Expansion ROM at 20000000 [disabled] [size=64K]
Capabilities: [50] Power Management version 2
Kernel driver in use: 8139too
Вывод sudo lshw -class network
читать дальше »
*-network
description: Ethernet interface
product: RTL-8139/8139C/8139C+
vendor: Realtek Semiconductor Co., Ltd.
physical id: 2
bus info: pci@0000:01:02.0
logical name: eth0
version: 10
serial: 00:80:48:26:1d:1d
size: 100Mbit/s
capacity: 100Mbit/s
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=8139too driverversion=0.9.28 duplex=full latency=32 link=yes maxlatency=64 mingnt=32 multicast=yes port=MII slave=yes speed=100Mbit/s
resources: irq:22 ioport:c000(size=256) memory:e9000000-e90000ff memory:20000000-2000ffff
*-network
description: Ethernet interface
physical id: 1
logical name: bond0
serial: 00:80:48:26:1d:1d
capabilities: ethernet physical
configuration: broadcast=yes driver=bonding driverversion=3.7.1 firmware=2 ip=172.25.46.127 link=yes master=yes multicast=yes
Получается, что только одна карта системой определилась? Хотя индикаторы на второй сетевой мигают...
Попробую переставить вторую сетевую в другой слот...
