чевой-то не то
Код:
su -
Password:
[root@rgate ~]# sysctl kern.geom.debugflags=16
kern.geom.debugflags: 0 -> 16
[root@rgate ~]# fdisk -BI /dev/ad4
******* Working on device /dev/ad4 *******
fdisk: Class not found
[root@rgate ~]#
и после пробовал
Код:
[root@rgate ~]# boot0cfg -t 36 ad4
boot0cfg: /dev/ad4: unknown or incompatible boot code
в man boot0cfg нашел
To go back to non-interactive booting, use fdisk(8) to install the
default MBR:
fdisk -B ad0 (тоже но без -I)
на первый вопрос ответил yes, на второй - no.
Код:
fdisk -B ad4
******* Working on device /dev/ad4 *******
parameters extracted from in-core disklabel are:
cylinders=71730 heads=16 sectors/track=63 (1008 blks/cyl)
Figures below won't work with BIOS for partitions not in cyl 1
parameters to be used for BIOS calculations are:
cylinders=71730 heads=16 sectors/track=63 (1008 blks/cyl)
Media sector size is 512
Warning: BIOS sector numbering starts with sector 1
Information from DOS bootblock is:
The data for partition 1 is:
sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD)
start 63, size 72303777 (35304 Meg), flag 80 (active)
beg: cyl 0/ head 1/ sector 1;
end: cyl 49/ head 15/ sector 63
The data for partition 2 is:
<UNUSED>
The data for partition 3 is:
<UNUSED>
The data for partition 4 is:
<UNUSED>
Do you want to change the boot code? [n] yes
We haven't changed the partition table yet. This is your last chance.
parameters extracted from in-core disklabel are:
cylinders=71730 heads=16 sectors/track=63 (1008 blks/cyl)
Figures below won't work with BIOS for partitions not in cyl 1
parameters to be used for BIOS calculations are:
cylinders=71730 heads=16 sectors/track=63 (1008 blks/cyl)
Information from DOS bootblock is:
1: sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD)
start 63, size 72303777 (35304 Meg), flag 80 (active)
beg: cyl 0/ head 1/ sector 1;
end: cyl 49/ head 15/ sector 63
2: <UNUSED>
3: <UNUSED>
4: <UNUSED>
Should we write new partition table? [n]
попробовал ребут - все получилось = выбора слайса не было.
Спасибо за помощь.
