Любопытный Гном, возьмите новый HDD , проверенный, исправный и качественный, подсоедините, установите Windows (оригинал) Это как никак дешевле чем замена мат платы будет
это мелкомягкие говорят
Цитрую их
If this is the case, the cause of this issue may be determined from the second parameter (the I/O status code) by using the following information in which the "value of second parameter" indicator is followed by a "general cause" format:
* 0xC000000E, or STATUS_NO_SUCH_DEVICE: the drive is unavailable, possibly because of a bad hard disk drive, a bad disk array, or a bad controller card.
* 0xC000009A, or STATUS_INSUFFICIENT_RESOURCES: lack of nonpaged pool resources.
* 0xC000009C, or STATUS_DEVICE_DATA_ERROR: bad blocks on the hard disk.
* 0xC000009D, or STATUS_DEVICE_NOT_CONNECTED: bad cabling, non-termination, or the controller cannot access the hard disk.
* 0xC000016A, or STATUS_DISK_OPERATION_FAILED: bad blocks on the hard disk.
* 0xC0000185, or STATUS_IO_DEVICE_ERROR: incorrect termination, or defective cabling of SCSI-based devices, or two devices are trying to use the same IRQ.
