доброго времени суток уважаемые спецы своего дела этого бесконечного фронта порой такого неблагодарного))!
маршрутизатор D-link 320 прошит под ASUS WL500gpV2 (куплен прошитым уже)
настроен по Yota настройки следующие:
IP Config - WAN & LAN
WAN IP Setting Get IP automatically?
WAN DNS Setting Get DNS Server automatically?
LAN IP Setting 172.16.128.90
IP Config - SNMP
Enable SNMP? No
IP Config - DHCP Server
Enable the DHCP Server? No
DNS and WINS Server Setting
DNS Server 1: "пусто поле", DNS Server 2: 172.16.128.90, WINS Server: "пусто поле"
Assign IP Address Manually
Enable Manual Assignment? No
IP Config - Route
Use DHCP routes? Yes
Enable multicast routing? No
Enable static routes? No
NAT Setting - Port Trigger
Enable Port Trigger? No
NAT Setting - Virtual Server
Enable Virtual Server? Yes
в таблице добавил запись вида
_________________________________________________________________
port range | local ip | local port | protocol | protocol no. | description|
--------------------------------------------------------------------------------------------------------
4899 | 172.16.128.3 | 4899 | tcp | | radmin |
--------------------------------------------------------------------------------------------------------
NAT Setting - Virtual DMZ
IP Address of Exposed Station: "пустое поле"
Internet Firewall - Basic Config
Enable Firewall? Yes
Enable DoS protection? No
Logged packets type: None
Enable Web Access from WAN? No
Port of Web Access from WAN: 8080
Respond LPR Request from WAN? Yes
Respond Ping Request from WAN? Yes
Number of connections to track: 4096
Internet Firewall - WAN & LAN Filter
Enable LAN to WAN Filter? No
Packets(LAN to WAN) not specified will be: Drop
Filtered ICMP(LAN to WAN) packet types: "пустое поле"
Enable WAN to LAN Filter? Yes
Packets(WAN to LAN) not specified will be: drop
Port Forwarding default policy: accept
Filtered ICMP(WAN to LAN) packet types: "пустое поле"
Internet Firewall - MAC Filter
MAC Filter Mode: disable
System Setup - Operation Mode
Home Gateway , Router , Access Point (радиокнопкой выбран режим Home gateway)
System Setup - Advanced Services Configuration
Telnet/SSH
Enable telnet access: yes
Enable SSH Server: no
SSH Port: 22
Wimax - Release for non-commercial use. http://binblog.ru/
Enable MadWimax: yes
Enable connection ping: yes
Remote server IP: 0.0.0.0
Packet size: 32
Вопрос когда я включаю фильтр Lan to Wan и добавляю запись в таблицу вида
_____________________________________________________________________
source ip | port range | destination ip | port range | protocol |
--------------------------------------------------------------------------------------------------------------
172.16.128.3 | 80 | 93.186.229.129 | 80 | tcp |
--------------------------------------------------------------------------------------------------------------
весь интернет пропадает во всей организации !
в чем я ошибся?
