Всю ночь сидел вызывал синий экран разными способами все записал и вот что записал:
A problem has been detected and windows has been shut down to prevent damage, to your computer.
a clock interrupt was not received on a secondaty processor within the allocated time interval.
If this is the first time you've seen this stoped error screen restart your computer. If this screen appears again, follow these steps:
Check to make sure any new hardware or software is properly or software is properly installed.
If this is a new installation ask you hardware or sofrete manufacturer for any windows updates you might need.
If problem continue disable or remove any newly installed hardware or software Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components restart your computer press F8 to seleet Advanced Startup Options and then select Safe Mode.
Techinacal infarmation:
STOP: 0x00000101 (0x00000061, 0x00000000, 0x803d1120, 0x00000001)
Collecting data for crash dump...
Initializing disk for crash dump
Physical memory dump complete
_________________________________________________________________________________
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: win32k.sys
PAGE_FAULT_IN_NONPAGED_AREA
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x10000050 (0x8007bb8c, 0x00000000, 0x90cee602, 0x00000000)
*** win32k.sys - Address 0x90cee503 base at 0x90c10000 DateStamp 0x47c78851
____________________________________________________________________________________
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: win32k.sys
PAGE_FAULT_IN_NONPAGED_AREA
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x10000050 (0x92dcc000, 0x00000008, 0x92dcc000, 0x00000000)
*** win32k.sys - Address 0x90bae503 base at 0x90ad0000 DateStamp 0x47c78851
________________________________________________________________________________________
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: ntkrnlpa.exe
KERNEL_MODE_EXCEPTION_NOT_HANDLED
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x1000008e (0xc0000005, 0x81afb2cb, 0x86f23a9c, 0x00000000)
*** ntkrnlpa.exe - Address 0x81afb2cb base at 0x81a0d000 DateStamp 0x4812bd71
___________________________________________________________________________________
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: hal.dll
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x00000101 (0x00000061, 0x00000000, 0x803d1120, 0x00000001)
__________________________________________________________________________________
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: win32k.sys
PAGE_FAULT_IN_NONPAGED_AREA
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x00000050 (0xbad1eaff, 0x00000001, 0x92d4049d, 0x00000002)
*** win32k.sys - Address 0x90bae5fa base at 0x90ad0000 DateStamp 0x47c78851
_______________________________________________________________________________________
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: hal.dll
KERNEL_MODE_EXCEPTION_NOT_HANDLED
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x1000008e (0xc0000005, 0x81dd73d3, 0x80399764, 0x00000000)
*** hal.dll - Address 0x81dd73d3 base at 0x81dc2000 DateStamp 0x47918a38
Цитата angelkastiel:
Прогони тестами стабильности типа S&M. БИОС мат. платы обновить не помешает. »
|
Обновить программное обеспечение или платы сами?