[решено] подскажите как настроить nmap при использовании при использовании pppoe подключения

выдает следующее сообщение:

Цитата:

WARNING: Using raw sockets because ppp2 is not an ethernet device. This probably won't work on Windows. pcap_open_live(ppp2, 100, 0, 2) FAILED. Reported error: Error opening adapter: Системе не удается найти указанное устройство. (20). Will wait 5 seconds then retry. pcap_open_live(ppp2, 100, 0, 2) FAILED. Reported error: Error opening adapter: Системе не удается найти указанное устройство. (20). Will wait 25 seconds then retry. Call to pcap_open_live() failed three times. There are several possible reasons for this, depending on your operating system: LINUX: If you are getting Socket type not supported, try modprobe af_packet or recompile your kernel with PACKET enabled. *BSD: If you are getting device not configured, you need to recompile your kernel with Berkeley Packet Filter support. If you are getting No such file or directory, try creating the device (eg cd /dev; MAKEDEV <device>; or use mknod). *WINDOWS: Nmap only supports ethernet interfaces on Windows for most operations because Microsoft disabled raw sockets as of Windows XP SP2. Depending on the reason for this error, it is possible that the --unprivileged command-line argument will help. SOLARIS: If you are trying to scan localhost or the address of an interface and are getting '/dev/lo0: No such file or directory' or 'lo0: No DLPI device found', complain to Sun. I don't think Solaris can support advanced localhost scans. You can probably use "-Pn -sT localhost" though. QUITTING!

переустановка драйверов и wincap не принесло результатов.