проблема с MPD5
 

Установил МПД и PPPOE server настроиль стартуется отлично
Но когда клиент коннект делает PADI запросы к серверу идет но ответ PADO нету
вот мои конф файлы

/etc/rc.conf
ifconfig_rl0="inet 192.168.11.239 netmask 255.255.255.0"
defaultrouter="192.168.11.229"
hostname="raduis.rabita.az"
ifconfig_vr0="inet 10.0.0.1 netmask 255.255.255.0"
sshd_enable="YES"
inetd_enable="YES"
apache2_enable="YES"
mysql_enable="YES"
mpd_enable="YES"
mpd_flags="-b"
radiusd_enable="YES"
natd_enable="YES"
natd_interface="vr0"
firewall_enable="YES"
firewall_type="OPEN"
gateway_enable="YES"


/usr/local/etc/mpd5/mpd.conf
startup:

set user camal freebsd admin
set user eldar freebsd
set console self 127.0.0.1 5005
set console open
set web self 192.168.11.239 5006
set web open

default:

load pppoe_server

pppoe_server:

create bundle template B
# Set IP addresses. Peer address will be later replaced by RADIUS.
set ipcp ranges 10.0.0.1/32 127.0.0.2/32
set ipcp dns 192.168.11.136 192.168.11.166
create link template common pppoe
set link enable multilink
set link action bundle B
set link disable chap pap eap
set link enable pap chap
load radius
set pppoe service "superisp"
create link template vr0 common
set link max-children 1000
set pppoe iface vr0
set link enable incoming
create link template vr1 common
set link max-children 500
set pppoe iface vr0
set link enable incoming

#radius:
# set radius config /usr/local/etc/raddb/radius.conf
# set radius server localhost freebsd 1812 1813
# set radius retries 3
# set radius timeout 3
# set radius me 10.0.0.1
# set auth acct-update 300
# set auth enable radius-auth
# set auth enable radius-acct
# set radius enable message-authentic


/usr/local/etc/mpd5/mpd.secret

MyLogin MyPassword
PeerLogin PeerPassword

test test 10.0.0.2
fred "fred-pw"
joe "foobar" 192.168.1.1
bob "\x34\"foo\n" 192.168.1.10/24
sal "yipee" 192.168.1.254

Ядро установлен с етими опциями
options HZ=1000
options NETGRAPH
options NETGRAPH_PPPOE
options NETGRAPH_SOCKET
options NETGRAPH_CISCO
options NETGRAPH_ECHO
options NETGRAPH_FRAME_RELAY
options NETGRAPH_HOLE
options NETGRAPH_KSOCKET
options NETGRAPH_LMI
options NETGRAPH_RFC1490
options NETGRAPH_TTY
options NETGRAPH_ASYNC
options NETGRAPH_BPF
options NETGRAPH_ETHER
options NETGRAPH_IFACE
options NETGRAPH_KSOCKET
options NETGRAPH_L2TP
options NETGRAPH_MPPC_ENCRYPTION
options NETGRAPH_PPP
options NETGRAPH_PPTPGRE
options NETGRAPH_TEE
options NETGRAPH_UI
options NETGRAPH_VJC

В чем же проблема ?

На заранее огромное спосибо