Здравствуйте, помогите отредактировать файл эмулятора геймпада XBox360 (x360ce.ini) для игры Mafia2. Проблема в следующем я скачал эмулятор геймпада Xbox 360 для игры Mafia II что бы играть в неё с рулем Genius Speed Wheel 3. Но когда с рулем заходишь в игру и садишься в автомобиль, автомобиль начинает ехать даже если не нажимать на педаль газа. Хотелось бы устранить этот "баг".
Исходный код того файла:
читать дальше »
Код:
[Options]
UseInitBeep=1 #use 0 to 1; default 1; beep on init
Log=0 #use 0 to 1; creates a log file in folder 'x360ce logs'
[PAD1]
Index=0
Native=0
VID=0x0
PID=0x0
Left Analog X=1
Left Analog X+ Button=0
Left Analog X- Button=0
#Left Analog Y+ Button=0
#Left Analog Y- Button=0
#Right Analog X+ Button=0
#Right Analog X- Button=0
Right Analog Y+ Button=0
Right Analog Y- Button=0
D-pad POV=1
D-pad Up=0
D-pad Down=0
D-pad Left=7
D-pad Right=8
A=6
B=4
X=5
Y=3
Left Shoulder=1
Right Shoulder=2
Back=9
Start=10
Left Thumb=11
Right Thumb=12
TriggerDeadzone=5
#этой строкой педаль газа переназначаем на правый курок
Right Trigger=a-2
UseForceFeedback=0
SwapMotor=0
ForcePercent=0
ControllerType=1
AxisToDPad=0
AxisToDPadDeadZone=256
AxisToDPadOffset=0
POVXReverse=0
POVYReverse=0
Left Analog X Linear=100
[PAD2]
Index=-1 #controller index in system game controllers list; 0 is first; -1 to ignore this pad
Left Analog X=1 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Left Analog Y=-2 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Right Analog X=3 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Right Analog Y=-6 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Left Analog X Linear=0 #-100 to +100 raise this number to increase sensitivity near center
Left Analog Y Linear=0 #-100 to +100 raise this number to increase sensitivity near center
Right Analog X Linear=0 #-100 to +100 raise this number to increase sensitivity near center
Right Analog Y Linear=0 #-100 to +100 raise this number to increase sensitivity near center
Left Analog X+ Button=0 #button id; 0 to disable
Left Analog X- Button=0 #button id; 0 to disable
Left Analog Y+ Button=0 #button id; 0 to disable
Left Analog Y- Button=0 #button id; 0 to disable
Right Analog X+ Button=0 #button id; 0 to disable
Right Analog X- Button=0 #button id; 0 to disable
Right Analog Y+ Button=0 #button id; 0 to disable
Right Analog Y- Button=0 #button id; 0 to disable
D-pad POV=1 #POV index; 0 to disable
D-pad Up=0 #button id; 0 to disable
D-pad Down=0 #button id; 0 to disable
D-pad Left=0 #button id; 0 to disable
D-pad Right=0 #button id; 0 to disable
A=2 #button id; 0 to disable
B=3 #button id; 0 to disable
X=1 #button id; 0 to disable
Y=4 #button id; 0 to disable
Left Shoulder=5 #button id; 0 to disable
Right Shoulder=6 #button id; 0 to disable
Back=9 #button id; 0 to disable
Start=10 #button id; 0 to disable
Left Thumb=11 #button id; 0 to disable
Right Thumb=12 #button id; 0 to disable
TriggerDeadzone=0 #use 0 to 255; default 0; add deadzone to trigger
Left Trigger=a-4 #button id; precede with 'a' for an axis; 's' for a slider; 'x' for a half range axis; 'h' for half slider; use '-' to invert ie. x-2;
Right Trigger=a-5 #button id; precede with 'a' for an axis; 's' for a slider; 'x' for a half range axis; 'h' for half slider; use '-' to invert ie. x-2;
UseForceFeedback=1 #use 0 to 1; default 0
SwapMotor=0 #use 0 to 1; default 0
ForcePercent=100 #use 0 to 100; default 100
ControllerType=1 #GAMEPAD 1; WHEEL 2; STICK 3; FLIGHT_SICK 4; DANCE_PAD 5; GUITAR 6; DRUM_KIT 8; //WILDS
AxisToDPad=0 #Use Axis to control DPad (0 disabled, 1 enabled) //WILDS
AxisToDPadDeadZone=256 #Dead zone for Axis //WILDS
AxisToDPadOffset=0 # //WILDS
POVXReverse=0 #Reverse POV Up/Down
POVYReverse=0 #Reverse POV Left/Right
[PAD3]
Index=-1 #controller index in system game controllers list; 0 is first; -1 to ignore this pad
Left Analog X=1 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Left Analog Y=-2 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Right Analog X=3 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Right Analog Y=-6 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Left Analog X Linear=0 #-100 to +100 raise this number to increase sensitivity near center
Left Analog Y Linear=0 #-100 to +100 raise this number to increase sensitivity near center
Right Analog X Linear=0 #-100 to +100 raise this number to increase sensitivity near center
Right Analog Y Linear=0 #-100 to +100 raise this number to increase sensitivity near center
Left Analog X+ Button=0 #button id; 0 to disable
Left Analog X- Button=0 #button id; 0 to disable
Left Analog Y+ Button=0 #button id; 0 to disable
Left Analog Y- Button=0 #button id; 0 to disable
Right Analog X+ Button=0 #button id; 0 to disable
Right Analog X- Button=0 #button id; 0 to disable
Right Analog Y+ Button=0 #button id; 0 to disable
Right Analog Y- Button=0 #button id; 0 to disable
D-pad POV=1 #POV index; 0 to disable
D-pad Up=0 #button id; 0 to disable
D-pad Down=0 #button id; 0 to disable
D-pad Left=0 #button id; 0 to disable
D-pad Right=0 #button id; 0 to disable
A=2 #button id; 0 to disable
B=3 #button id; 0 to disable
X=1 #button id; 0 to disable
Y=4 #button id; 0 to disable
Left Shoulder=5 #button id; 0 to disable
Right Shoulder=6 #button id; 0 to disable
Back=9 #button id; 0 to disable
Start=10 #button id; 0 to disable
Left Thumb=11 #button id; 0 to disable
Right Thumb=12 #button id; 0 to disable
TriggerDeadzone=0 #use 0 to 255; default 0; add deadzone to trigger
Left Trigger=a-4 #button id; precede with 'a' for an axis; 's' for a slider; 'x' for a half range axis; 'h' for half slider; use '-' to invert ie. x-2;
Right Trigger=a-5 #button id; precede with 'a' for an axis; 's' for a slider; 'x' for a half range axis; 'h' for half slider; use '-' to invert ie. x-2;
UseForceFeedback=1 #use 0 to 1; default 0
SwapMotor=0 #use 0 to 1; default 0
ForcePercent=100 #use 0 to 100; default 100
ControllerType=1 #GAMEPAD 1; WHEEL 2; STICK 3; FLIGHT_SICK 4; DANCE_PAD 5; GUITAR 6; DRUM_KIT 8; //WILDS
AxisToDPad=0 #Use Axis to control DPad (0 disabled, 1 enabled) //WILDS
AxisToDPadDeadZone=256 #Dead zone for Axis //WILDS
AxisToDPadOffset=0 # //WILDS
POVXReverse=0 #Reverse POV Up/Down
POVYReverse=0 #Reverse POV Left/Right
[PAD4]
Index=-1 #controller index in system game controllers list; 0 is first; -1 to ignore this pad
Left Analog X=1 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Left Analog Y=-2 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Right Analog X=3 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Right Analog Y=-6 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Left Analog X Linear=0 #-100 to +100 raise this number to increase sensitivity near center
Left Analog Y Linear=0 #-100 to +100 raise this number to increase sensitivity near center
Right Analog X Linear=0 #-100 to +100 raise this number to increase sensitivity near center
Right Analog Y Linear=0 #-100 to +100 raise this number to increase sensitivity near center
Left Analog X+ Button=0 #button id; 0 to disable
Left Analog X- Button=0 #button id; 0 to disable
Left Analog Y+ Button=0 #button id; 0 to disable
Left Analog Y- Button=0 #button id; 0 to disable
Right Analog X+ Button=0 #button id; 0 to disable
Right Analog X- Button=0 #button id; 0 to disable
Right Analog Y+ Button=0 #button id; 0 to disable
Right Analog Y- Button=0 #button id; 0 to disable
D-pad POV=1 #POV index; 0 to disable
D-pad Up=0 #button id; 0 to disable
D-pad Down=0 #button id; 0 to disable
D-pad Left=0 #button id; 0 to disable
D-pad Right=0 #button id; 0 to disable
A=2 #button id; 0 to disable
B=3 #button id; 0 to disable
X=1 #button id; 0 to disable
Y=4 #button id; 0 to disable
Left Shoulder=5 #button id; 0 to disable
Right Shoulder=6 #button id; 0 to disable
Back=9 #button id; 0 to disable
Start=10 #button id; 0 to disable
Left Thumb=11 #button id; 0 to disable
Right Thumb=12 #button id; 0 to disable
TriggerDeadzone=0 #use 0 to 255; default 0; add deadzone to trigger
Left Trigger=a-4 #button id; precede with 'a' for an axis; 's' for a slider; 'x' for a half range axis; 'h' for half slider; use '-' to invert ie. x-2;
Right Trigger=a-5 #button id; precede with 'a' for an axis; 's' for a slider; 'x' for a half range axis; 'h' for half slider; use '-' to invert ie. x-2;
UseForceFeedback=1 #use 0 to 1; default 0
SwapMotor=0 #use 0 to 1; default 0
ForcePercent=100 #use 0 to 100; default 100
ControllerType=1 #GAMEPAD 1; WHEEL 2; STICK 3; FLIGHT_SICK 4; DANCE_PAD 5; GUITAR 6; DRUM_KIT 8; //WILDS
AxisToDPad=0 #Use Axis to control DPad (0 disabled, 1 enabled) //WILDS
AxisToDPadDeadZone=256 #Dead zone for Axis //WILDS
AxisToDPadOffset=0 # //WILDS
POVXReverse=0 #Reverse POV Up/Down
POVYReverse=0 #Reverse POV Left/Right
