Собирание Ядра

SantaXP · Отправлено: **19:47, 18-03-2005** | #2

А вот код самого ядра:

Код:

# SantaXP
# 9 mart 2005 year - 22:37
# My 1-st KERNEL
cpu             I386_CPU
machine		i386
ident		NEWKERNEL
maxusers        8
makeoptions     DEBUG=-g

# To statically compile in device wiring instead of /boot/device.hints
#hints		"GENERIC.hints"		# Default places to look for devices.

options         CPU_ENABLE_SSE
options		PREEMPTION

options         MAXDSIZ="(256*1024*1024)"
options         MAXSSIZ="(256*1024*1024)"
options         DFLDSIZ="(256*1024*1024)"

options 	SCHED_4BSD		# 4BSD scheduler
options 	INET			# InterNETworking
options 	INET6			# IPv6 communications protocols
options 	FFS			# Berkeley Fast Filesystem
options 	SOFTUPDATES		# Enable FFS soft updates support
options 	UFS_ACL			# Support for access control lists
options 	UFS_DIRHASH		# Improve performance on big directories
options 	MD_ROOT			# MD is a potential root device
options 	NFSCLIENT		# Network Filesystem Client
options 	NFSSERVER		# Network Filesystem Server
options 	NFS_ROOT		# NFS usable as /, requires NFSCLIENT
options 	MSDOSFS			# MSDOS Filesystem
options 	CD9660			# ISO 9660 Filesystem

options 	PROCFS			# Process filesystem (requires PSEUDOFS)
options 	PSEUDOFS		# Pseudo-filesystem framework
options 	GEOM_GPT		# GUID Partition Tables.
options 	COMPAT_43		# Compatible with BSD 4.3 [KEEP THIS!]
options 	COMPAT_LINUX
options 	COMPAT_FREEBSD4		# Compatible with FreeBSD4
options 	SCSI_DELAY=15000	# Delay (in ms) before probing SCSI
options 	KTRACE			# ktrace(1) support
options 	SYSVSHM			# SYSV-style shared memory
options 	SYSVMSG			# SYSV-style message queues
options 	SYSVSEM			# SYSV-style semaphores
options 	_KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
options 	KBD_INSTALL_CDEV	# install a CDEV entry in /dev
options 	AHC_REG_PRETTY_PRINT	# Print register bitfields in debug
					# output.  Adds ~128k to driver.
options 	AHD_REG_PRETTY_PRINT	# Print register bitfields in debug
					# output.  Adds ~215k to driver.
options 	ADAPTIVE_GIANT		# Giant mutex is adaptive.

device		apic		# I/O APIC

# Bus support.  Do not remove isa, even if you have no isa slots
device		isa
device		eisa
device		pci
device          npx

# Floppy drives
device		fdc

# ATA and ATAPI devices
device		ata
device		atadisk		# ATA disk drives
device		atapicd		# ATAPI CDROM drives
device		atapifd		# ATAPI floppy drives
device		atapist		# ATAPI tape drives
options 	ATA_STATIC_ID	# Static device numbering


# SCSI peripherals
device		scbus		# SCSI bus (required for SCSI)
device		ch		# SCSI media changers
device		da		# Direct Access (disks)
device		sa		# Sequential Access (tape etc)
device		cd		# CD
device		pass		# Passthrough device (direct SCSI access)
device		ses		# SCSI Environmental Services (and SAF-TE)

# atkbdc0 controls both the keyboard and the PS/2 mouse
device		atkbdc # AT keyboard controller
device		atkbd	# AT keyboard
device		psm	# PS/2 mouse

device		vga	# VGA video card driver
device		radeondrm
options         VGA_WIDTH90

options         SC_PIXEL_MODE
options         MAXCONS=16

device		splash		# Splash screen and screen saver support

options         SC_DISABLE_REBOOT
options         SC_HISTORY_SIZE=1000
options         SC_MOUSE_CHAR=0x3

# syscons is the default console driver, resembling an SCO console

# Enable this for the pcvt (VT220 compatible) console driver
#device		vt
#options 	XSERVER		# support for X server on a vt console
#options 	FAT_CURSOR	# start with block cursor

device		agp		# support several AGP chipsets

# Floating point support - do not disable.
device		npx

# Power management support (see NOTES for more options)
#device		apm
# Add suspend/resume support for the i8254.
device		pmtimer

# Serial (COM) ports
device		sio		# 8250, 16[45]50 based 

# Parallel port
device		ppc
device		ppbus		# Parallel port bus (required)
device		lpt		# Printer
device		plip		# TCP/IP over parallel
device		ppi		# Parallel port interface device
#device		vpo		# Requires scbus and da

# If you've got a "dumb" serial or parallel PCI card that is
# supported by the puc(4) glue driver, uncomment the following
# line to enable it (connects to the sio and/or ppc drivers):
#device         puc

# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device		miibus		# MII bus support

# ISA devices that use the old ISA shims
#device		le

# Pseudo devices.
device	        loop		# Network loopback
device		mem		# Memory and kernel memory devices
device		io		# I/O device
device		random		# Entropy device
device		sl		# Kernel SLIP
device		ppp		# Kernel PPP
device          pty		# Pseudo-ttys (telnet etc)
device		md		# Memory "disks"

# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
device		bpf		# Berkeley packet filter

# USB support
device		uhci		# UHCI PCI->USB interface
device		ohci		# OHCI PCI->USB interface
device		usb		# USB Bus (required)
device		udbp		# USB Double Bulk Pipe devices
device		ugen		# Generic
device		uhid		# "Human Interface Devices"
device		ukbd		# Keyboard
device		ulpt		# Printer
device		umass		# Disks/Mass storage - Requires scbus and da
device		ums		# Mouse
device		urio		# Diamond Rio 500 MP3 player
device		uscanner	# Scanners

-------------
Видимо что-то я делаю не так, ибо собираю ядро впервые, спасибо за внимание!

Belansky · Отправлено: **08:46, 20-03-2005** | #3

SantaXP
Версия FreeBSD у Вас какая?

SantaXP · Отправлено: **15:07, 20-03-2005** | #4

Belansky
FreeBSD 5.3...

SantaXP · Отправлено: **16:24, 23-03-2005** | #5

Хм... Может где-нить тогда подскажите ресурс по поводу кода ошибок и их значений???

SantaXP · Отправлено: **11:42, 26-03-2005** | #6

Теперь появилась новая проблема - ядро собралось, но выдаёт при загрузке вот это:
CPU: Pentium Pro (Unlnown – class CPU)
panic: CPU class not configured
Uptine: 1s
А потом виснет. Что это за штука то такая???

SantaXP · Отправлено: **11:42, 26-03-2005** | #7

Теперь появилась новая проблема - ядро собралось, но выдаёт при загрузке вот это:
CPU: Pentium Pro (Unlnown – class CPU)
panic: CPU class not configured
Uptine: 1s
А потом виснет. Что это за штука то такая???
Ибо процессор у меня вообще-то Athlon XP...

Belansky · Отправлено: **11:02, 28-03-2005** | #8

SantaXP
Скорее всего, Вы неправильно определили тип процессора в /etc/make.conf или в конфиге Вашего ядра.
Посмотрел Выше, в Ваш конгфиг. Так оно и есть.

Цитата:

cpu I386_CPU
machine i386

Все, что старше процессара Pentium определяется как I686_CPU. А в /etc/make.conf Вам нужно прописать CPUTYPE?=athlon-xp

SantaXP · Отправлено: **13:15, 28-03-2005** | #9

Belansky Спасибо, попробую! может наконец получится таки!

Belansky · Отправлено: **13:56, 28-03-2005** | #10

SantaXP

Цитата:

может наконец получится таки!

В конце концов обязательно получится.